A Canton homeowner called about their Admiral oven that wouldn’t heat despite the controls appearing to work normally. We found a failed bake element that needed replacement to restore proper heating. The Problem The customer reported that their oven controls seem to work, but the oven doesn’t heat. The unit appeared to respond to temperature … Read more
A JennAir double wall oven in Canal Fulton wasn’t heating properly in the top convection unit. The homeowner reported the top oven was slow to heat and wouldn’t get hotter than 300 degrees, and they also wanted the bottom oven calibrated. The Problem The top oven with convection was slow to heat and wouldn’t get … Read more
We responded to a service call on Portage Glen Avenue Northwest in North Canton, OH for an Admiral oven/stove where the surface element had stopped working. While the inside oven was still working, the customer needed their cooktop back in service. Our diagnosis revealed an unexpected cause that’s more common than most homeowners realize. The … Read more
A Carrollton customer called when their Frigidaire oven stopped working completely. The oven won’t heat at all, leaving them without a working range. What we discovered during diagnosis was extensive damage that made this unit beyond economical repair. The Problem The customer reported their oven won’t heat at all. Complete loss of heating function with … Read more
We responded to a service call in Minerva, OH for a Kenmore oven that wouldn’t light. After diagnosing the issue, we found the bake igniter had failed and needed replacement. The Problem The customer reported their oven won’t light. This is a common symptom when the ignition system fails to generate enough heat to open … Read more
A Frigidaire oven in Atwater stopped working after the homeowner heard a popping noise and smelled an electrical burning smell during preheating. Our diagnosis revealed a burnt control board that would need rebuilding to restore oven function. The Problem The customer turned on the oven to pre-heat when they heard a popping noise and then … Read more
A Kenmore oven in North Canton had stopped working completely — neither oven nor broiler would ignite, though the stovetop burners still lit normally. We found a failed igniter assembly that needed replacement to restore full operation. The Problem The customer reported that neither oven or broiler will ignite. Burners will light. Diagnosis The igniter … Read more
We responded to a service call on Spangler Street Northeast in Canton, OH for an Admiral oven that would not ignite. Our diagnosis revealed a bad bake relay on the control board, which was preventing the ignition system from functioning properly. The Problem The customer reported that their oven would not ignite. The unit was … Read more
A Kenmore oven in North Canton wasn’t reaching proper temperature despite running for over an hour. The homeowner reported it would get warm but couldn’t hit 400 degrees and stayed stuck on preheat. Our diagnosis revealed a failing igniter that wasn’t generating enough heat to properly light the gas burner. The Problem The customer called … Read more
A Samsung oven on Avalon Street Northwest in Canton, OH had wires that caught fire. We replaced the damaged wire harness and valve assembly to restore safe operation. The Problem The customer reported that wires caught fire in their Samsung oven. This created a dangerous situation requiring immediate attention and repair. Diagnosis Upon inspection, we … Read more