Noisy Samsung Dryer: Nineteen of 42 Were the Idler Pulley

A Samsung dryer that has started squealing, chirping, thumping or grinding is almost always telling you that something which holds the drum up or keeps the belt tight is wearing out. There is usually no error code. The noise is the symptom, and it tends to get louder before anything actually stops.

Most advice online gives you a long list of possibilities and leaves you to guess. Here is what the noise actually turned out to be on my last 42 Samsung dryers in Stark County.

What the noise really was, forty-two times

Add the first two boxes together and thirty-five of the forty-two came down to the same small group of wearing parts: the idler pulley and the drum rollers. On a Samsung dryer a noise is usually a routine repair, not a reason to go shopping.

What you can check first — and the honest odds

Unplug the dryer before you do anything. If it is a gas model, also shut off the gas valve behind it, and do not go any further than the lint screen and the vent. Nothing inside a gas dryer cabinet is a do-it-yourself job.

With the power off, you can do four things safely:

Do it, but be realistic. None of my 42 was cured by cleaning the lint screen. The two blower wheel jobs were the only ones where lint or a jam was the noise: one had to be cleared of lint from inside, and the other was freed by turning the drum backwards. A noisy Samsung is almost always a worn part, and a worn part does not clean up.

Do the lint and vent check anyway, for a different reason: one of these 42 had fire damage inside the cabinet. If you smell scorching, see brown marks around the door or lint screen, or the noise has turned into scraping, stop using the dryer and call.

The check that tells a cheap fix from an expensive one

Once the dryer is open and unplugged, I take the belt off so the idler and the drum can be turned separately. That leaves three states worth telling apart, and they land at very different places.

The reason to check both parts separately is that worn idlers and worn rollers so often turn up together. If you replace only the loudest part, the other one is still turning on borrowed time. That is why so many of these jobs ended with belt, idler and rollers in one visit, rather than a single part and a second trip.

The drum check matters for a different reason. On the broken drum there was no replacement available at all. You want that known before anybody orders a roller kit, not after.

What it costs

The service call is $187, a little more outside the regular route, and it comes off the repair when you go ahead. You get a flat-rate quote before any work starts, and labor is covered for six months. If it turns out to be one of the cases where the drum is gone or the cabinet is damaged, I will tell you so plainly rather than sell you parts for a dryer that is not worth saving. Three of these 42 were in that spot: the cracked drum, the broken drum and the fire damage.

I have been servicing Samsung since 2018, back when most independents around here would not touch them. Idler pulleys, rollers and repair kits for these dryers are ordinary parts. A squealing Samsung is a normal repair.

Lint is clean and the Samsung is still squealing or thumping? Schedule online any time, or call or text (330) 693-9163.