Frigidaire Oven Repair (Model FEF352AWF) – Canton, OH

A Canton homeowner called us when their Frigidaire oven stopped heating entirely. The model FEF352AWF would power on and display settings, but no heat was reaching the oven cavity. Our diagnosis revealed a failed main control board — the electronic brain that manages heating cycles and temperature regulation.

The Problem

The customer reported their oven wasn’t heating at all. The display worked normally and they could set temperatures, but the oven remained cold even after extended preheating periods. This is a classic symptom of control board failure in Frigidaire electric ranges.

Diagnosis

We tested the heating elements first — they checked out fine with proper continuity readings. The issue was with the main control board (part 316207511), which wasn’t sending power to the elements despite receiving proper commands from the user interface. Control boards in this Frigidaire series are known to develop solder joint failures that disrupt the heating circuits.

The Repair

• Parts replaced: 316207511 — main control board (clock/timer electronic)
• Work performed: Disconnected power, removed old control board, installed new board, reconnected all wiring harnesses
• Result: Oven preheated to 350°F in normal time, maintained accurate temperature throughout test cycle

Is It Worth Repairing?

The FEF352AWF is a solid mid-range Frigidaire model that typically lasts 12-15 years with proper maintenance. If your unit is under 10 years old, this control board replacement usually makes financial sense. The repair restores full functionality and these new control boards are more reliable than the originals.

Maintenance Tips for Frigidaire Electric Ovens

• Clean spills immediately to prevent them from reaching the control board vents underneath the cooktop
• Run the self-clean cycle no more than 3-4 times per year — excessive heat can stress the control electronics
• Check that the oven door seals properly — poor sealing forces the control board to work harder maintaining temperature

Appliance Repair in Canton, OH

Canton is in Stark County — an area we cover regularly from our base in Louisville, OH. We also serve North Canton, Alliance, and Massillon. Louisville Appliance Repair is owned and operated by Samuel Willhite, a master-certified technician with Bosch and Speed Queen factory authorizations. If your appliance needs service, schedule online or call (330) 693-9163. You can also find us on Google and read verified reviews from customers across Stark County and surrounding areas.