Kenmore Washer Repair (Model 110.16852500) – Uniontown, OH

A Kenmore washer in Uniontown stopped mid-cycle, leaving wet clothes stranded in the tub. Our diagnosis revealed a faulty door switch that was no longer communicating with the control board, causing the safety system to halt operation.

The Problem

The homeowner called after their Kenmore 110.16852500 washer suddenly stopped during a wash cycle. The machine would start normally but shut down partway through, leaving clothes soaking wet. No error codes displayed, but the washer refused to resume or complete any cycle.

Diagnosis

Testing revealed the door switch had failed internally. This critical safety component tells the control board when the lid is properly closed and locked. When it malfunctions, the washer interprets this as an open lid condition and immediately stops all operation to prevent injury. The switch showed no continuity when actuated, confirming it needed replacement.

The Repair

• Parts replaced: WP8318084 — lid switch assembly
• Work performed: Removed old switch, installed new factory part, tested all connections
• Result: Completed full wash cycle with proper lid detection and normal operation

Is It Worth Repairing?

This Kenmore 110 series washer is a solid, mechanical unit that typically runs 15-20 years with proper care. The door switch is a common wear item that’s worth replacing on these models. Given the relatively simple repair and the washer’s proven reliability, this fix makes good financial sense.

Maintenance Tips for Kenmore Washers

• Avoid slamming the lid — this stresses the switch mechanism and can cause premature failure
• Keep the lid area clean and free of detergent buildup that can interfere with switch operation
• Check that the lid striker aligns properly with the switch — bent or loose strikers cause switch wear

Appliance Repair in Uniontown, OH

Uniontown is in Summit County — an area we cover regularly from our base in Louisville, OH. We also serve Green, North Canton, and Hartville. Louisville Appliance Repair is owned and operated by Samuel Willhite, a master-certified technician with Bosch and Speed Queen factory authorizations. If your appliance needs service, schedule online or call (330) 693-9163. You can also find us on Google and read verified reviews from customers across Summit County and surrounding areas.