LG Washer Repair (Model WM3670HWA) – Alliance, OH
In Alliance, OH, a washer that won’t drain or spin leaves clothes soaked and disrupts routines. We quickly traced the issue to a failed drain pump and restored service.
- Complaint: Washer would not drain or spin and made grinding noise.
- Cause: Failed drain pump motor.
- Fix: Replaced drain pump assembly with stocked part; tested drain and spin.
- Result: Washer drains fully and completes spin cycle quietly.
Diagnostic Findings
- Standing water in tub; unit would not enter spin
- Pump energized but produced loud buzzing/grinding
- Drain filter clear and hoses unobstructed
- Pump winding out of spec, confirming motor failure
DIY? Read This First — Unplug the appliance and disconnect utilities before attempting repairs.
Disclosure: Some links below are affiliate (“sponsored”). We may earn a small commission.
Repairs Performed
Typical repair range: $155.49–$255.49.
If the repair cost approaches 50% of a new unit, it may be worth exploring replacement options.
Maintenance Tips for Appliances
- Clean the washer’s drain filter monthly to prevent clogs.
- Use measured HE detergent to reduce residue and odors.
- In Stark County, combat mineral buildup with monthly tub clean or a water softener.
- Leave the door ajar after cycles to reduce moisture and mildew.
Final Verification
We completed functional tests to verify proper operation and checked for leaks, errors, and responsiveness.
Schedule service · Read reviews · Find parts
Disclosure: Some links are affiliate (“sponsored”). We may earn a commission.