Maytag Dryer Repair (Model LDG8414AAE) – Leetonia, OH
With no warmth and long cycles, laundry was taking far too long. Restoring reliable heat got this Leetonia area home back on schedule.
- Complaint: Dryer ran but had little to no heat; medium loads took about 90 minutes and felt cool when opened.
- Cause: Failed igniter and weak gas valve coils prevented proper burner ignition.
- Fix: Replaced the igniter and both gas valve coil packs; verified ignition and burner cycling.
- Result: Normal heat returned and dry times are back to a single cycle with even results.
Diagnostic Findings
- Drum tumbled but no flame observed at burner viewport
- Igniter measured open/high resistance
- Gas valve coils weak and failing when warm
- Exhaust airflow strong; vent path clear
- Post-repair: burner lights quickly and cycles normally
DIY? Read This First — Unplug the appliance and disconnect utilities before attempting repairs.
Disclosure: Some links below are affiliate (“sponsored”). We may earn a small commission.
Repairs Performed
Typical repair range: $183.48–$283.48.
If the repair cost approaches 50% of a new unit, it may be worth exploring replacement options.
Shop new Maytag Dryer models at Grove ApplianceMaintenance Tips for Appliances
- Clean the lint filter after every load to keep airflow strong.
- Inspect and clean the vent duct annually to prevent long dry times.
- In the Leetonia area, check the exterior vent hood seasonally to clear lint and debris.
- If a gas dryer tumbles but doesn’t heat, stop repeated restarts and have the ignition system inspected.
Final Verification
We completed functional tests to verify proper operation and checked for leaks, errors, and responsiveness.
Schedule service · Read reviews · Find parts
Disclosure: Some links are affiliate (“sponsored”). We may earn a commission.