A Whirlpool washer on Pontiac Trail in Malvern was displaying an “EE” error code after basement flooding. Our inspection revealed extensive water damage to critical electrical components that made repair impractical. The Problem The customer contacted us about their Whirlpool washer reading “Error .EE” on the display. The unit had been sitting in water after … Read more
A Whirlpool washer in Malvern was displaying E01 and E09 error codes, with the manual indicating a water pump problem. Our diagnostic revealed a plugged screen in the washer that was causing the pump errors. The Problem The customer reported E01 and E09 error codes appearing on their Whirlpool washer. According to the manual, these … Read more
The refrigerator was not cooling and the freezer failed to freeze. The issue was traced to low freon levels, making repair uneconomical.
The refrigerator was not cooling properly, leading to spoiled food. The issue was resolved by repairing the cooling system.
A Samsung washer at a home on West Main Street in Malvern wasn’t putting water in and wouldn’t finish cycles. What looked like a water valve problem turned out to be something much simpler — improper drain hose installation causing a siphon effect. The Problem The customer reported their wash machine wasn’t putting water in … Read more
The range was unresponsive with no lights or sounds. An electrician was needed to check the house wiring.
The washer was leaking from the cold water hose near the faucet. Replacing the fill hoses resolved the issue.
The dryer ran continuously due to a faulty timer. Replacing the timer resolved the issue.
The oven was not heating properly, with flickering display lights and a constant clicking sound. It is now operating correctly.
The ice maker was leaking water along with the ice, leading to a messy situation. Replacing the ice maker resolved the issue, but a water valve is still needed.