Repair record › Kenmore ranges
We've repaired 18 Kenmore ranges for this problem between June 2019 and September 2026. This is what was actually wrong, counted from our own job records.
Of the 18 Kenmore ranges we've repaired for "oven not heating", the most common cause was: oven igniter failed (5 jobs, 28%), followed by oven igniter weak (4) and control board failed (3). The parts we replaced most often were oven igniter, heating element, control board.
Seen once each: surface element burned out, door lock failed, heating element wired incorrectly.
One repair can replace more than one part, so these add up to more than the number of jobs.
Most of these jobs showed no code at all; the customer just noticed the problem.
Replaced the weak bake igniter.
Oven igniter failed · September 2026Replaced the oven igniter.
Oven igniter weak · June 2026Replaced the bake element.
Heating element burned out · November 2021Replaced the oven burner and igniter assembly.
Oven igniter failed · model 36275191893 · August 2021Replaced the control board and front right burner.
Control board failed · model 79091062601 · August 2021Each job on this page is a completed service call from our own records. After every repair, the technician notes the complaint, what was found and what was replaced. We group jobs by brand, appliance and complaint, then count the causes. Customer names, addresses and prices are never published. Last updated November 2026.
Reviewed by Sam Willhite, owner and technician at Louisville Appliance Repair, repairing appliances in Stark County since 2018.
The full record by brand, appliance and town is on our repair record page.
Book online any time, or call or text (330) 693-9163.