On a service call to North Canton, OH, Samuel Willhite found a Kenmore range that wouldn’t light after a grease spill. The bake igniter was drawing only 2.6 amps, well below the 3.2–3.6 amps needed to open the gas valve. A replacement igniter got the oven lighting reliably again. The Problem Cannot light burner(s) due … Read more
A Kenmore gas range in Canton, OH stopped heating, and the cause came down to a weak oven igniter that wasn’t drawing enough current to open the gas valve. Samuel replaced the igniter on this service call, and the oven was lighting properly before he left. The Problem ** WEBSITE LEAD **Requested: 2026-06-16Notes: Timing details: … Read more
On a service call to North Nickel Plate Street in Louisville, OH, Samuel Willhite diagnosed a noisy Kenmore range (model 790.42529313) and had it running quietly again before leaving the home. The Problem Making noise The Repair Replaced cooling fan. Good to go. Appliance Repair in Louisville, OH Louisville is in Stark County, an area … Read more
A measuring cup accident left a North Canton homeowner with a cracked glass cooktop on her Kenmore range. When we arrived on Adena Street NE, we found the glass top had both cracked and developed a hole where the measuring cup had dropped. The Problem The customer reported that a measuring cup had dropped on … Read more
A Canton homeowner called us about their Kenmore range overheating despite already replacing the temperature sensor. We found visible damage to the main control board and an F10 error code indicating the real culprit behind the persistent overheating issue. The Problem The customer reported their oven was overheating and running too hot. They had already … Read more
A Louisville homeowner called about their Kenmore range that wouldn’t heat to the set temperature. The oven not heating properly turned out to be a failed bake element that needed replacement. The Problem The customer reported that their oven was not heating properly and wouldn’t heat to the set temperature. This is a common issue … Read more
Broiler appeared inoperative. Verified normal operation and showed correct broil settings; no parts needed.