On a service call to Louisville, OH, Samuel found a Maytag dryer making a loud noise during operation. The idler pulley had locked up and the machine had accumulated heavy lint buildup inside the cabinet. After vacuuming out the lint and addressing the pulley, the dryer was back in working order. The Problem Timing details: … Read more
On a service call to East Reno Drive in Louisville, OH, Samuel found a GE front-load washer leaving standing water after every cycle. The customer had already cleaned the filter with no blockage found. After diagnosing a failed load-side command output on the main control board, Samuel replaced the board and confirmed full drain function … Read more
On a service call to Edmar St in Louisville, OH, Samuel found a GE refrigerator leaking water from the freezer. The drain trough had iced over and was obstructing the defrost drain, preventing water from reaching the drain pan below. Samuel cleared the ice, verified drain flow, and cycled the defrost timer, with a follow-up … Read more
On a service call to Louisville, OH, Samuel found a Whirlpool refrigerator (model WRF535SMBM00) with a door gasket that was no longer sealing correctly. After replacing the right-hand door gasket, the refrigerator was back in working order. The Problem Door gasket isn’t sealing correctly The Repair Replaced RH door gasket. Good to go. Parts replaced: … Read more
A GE dishwasher on Edith St in Louisville, OH had been sporadically beeping even after a motherboard and door latch replacement. Samuel found an error code indicating the control board was resetting repeatedly, and a software update was available to address the issue. The Problem Dishwasher sporadically beeping; motherboard and door latch already replaced, issue … Read more
On a service call to Louisville, OH, Samuel found a Whirlpool dishwasher that had stopped receiving water. The culprit turned out to be a small but critical rocker piece between the float and float switch that had been removed and set aside. Once it was reinstalled, the unit was back to washing, draining, and heating … Read more
On a service call to Louisville, OH, Samuel Willhite diagnosed a Whirlpool washer that wouldn’t shut off after completing a cycle and had stopped finishing full wash cycles. The culprit was an F3E2 error code pointing to the main control board, which was replaced to restore normal operation. The Problem Whirlpool Washer Pump won’t shut … Read more
On a service call to Louisville St NE in Louisville, OH, Samuel found a Whirlpool dishwasher that would not power on at all. The controls were completely unresponsive, and the issue traced back to the power supply rather than the appliance itself. The next step was handed off to an electrician to restore proper power … Read more
On a warranty service call to McIntosh Dr NE in Louisville, OH, Samuel visited a customer who was unable to connect their new GE range to Wi-Fi, which was blocking access to features like air fryer mode. The connection was established and the oven was confirmed working before Samuel left. The Problem ** GE WARRANTY … Read more
On a service call to Broadway Ave NE in Louisville, OH, Samuel found a GE refrigerator that had stopped making ice. The ice maker arm was sticking and not cycling on its own, preventing ice production. Replacing the ice maker unit resolved the problem. The Problem ICE MAKER NOT PRODUCING ICE The Repair Freezer temps … Read more