We completed a microwave installation on Union Ave in Homeworth, OH. The customer requested installation of a new GE microwave. We installed the new unit and verified everything was working properly. The Problem The customer needed a new microwave installed. This was a straightforward installation job rather than a repair. Diagnosis No diagnosis was needed … Read more
A customer in Homeworth called us about their GE dishwasher that fills, washes and then water spills out all over the floor. We discovered the drain valve shaft was loose in the pump assembly, preventing the drain solenoid from actuating properly. The Problem The dishwasher would fill and run through its wash cycle normally, but … Read more
A Whirlpool washer on Center Road in Homeworth was leaking water throughout the laundry room. Our diagnostic revealed a cracked tub that would require significant repair investment to restore proper operation. The Problem The customer reported their Whirlpool washer was leaking water. Water was escaping from the unit during wash cycles, creating potential damage to … Read more
The washer wouldn’t drain properly, but it was quickly fixed and is now functioning well.
Water was pooling at the bottom of the fridge due to a plugged drain. Cleaning the drain resolved the issue.
The dryer was making a squeaking sound, which was fixed by replacing the idler pulley, drum support wheels, and belt.
The refrigerator was not cooling properly, reaching 50 degrees despite being set to the coldest setting. A foam obstruction in the condenser fan was the culprit.
The refrigerator wasn’t cooling due to a frosted panel in the freezer. Replaced the jazz board and defrost thermostat to restore functionality.
The gas wall oven failed to heat up, but after replacing the igniter, it lit right away and preheated in just 5.5 minutes.
The oven coil was not working, but after replacing the burned-out bake element, it now operates normally.