Frigidaire Refrigerator Repair (Model FFHT1715LB4) – Homeworth, OH
The refrigerator was not cooling properly, reaching 50 degrees despite being set to the coldest setting. A foam obstruction in the condenser fan was the culprit.
The refrigerator was not cooling properly, reaching 50 degrees despite being set to the coldest setting. A foam obstruction in the condenser fan was the culprit.
The refrigerator wasn’t cooling due to a frosted panel in the freezer. Replaced the jazz board and defrost thermostat to restore functionality.
The gas wall oven failed to heat up, but after replacing the igniter, it lit right away and preheated in just 5.5 minutes.
The oven coil was not working, but after replacing the burned-out bake element, it now operates normally.
The Maytag dryer wasn’t blowing air due to a cracked blower wheel. After replacing it, the dryer is now operating properly.
A KitchenAid dishwasher in Homeworth wasn’t working properly and needed an icemaker waterline installed. The customer needed their dishwasher fixed and their icemaker waterline hooked up, but what started as a routine repair turned into a more complex issue requiring multiple visits. The Problem The customer called needing their dishwasher fixed and their icemaker waterline … Read more
A Kenmore washer in Homeworth, OH wouldn’t run water on normal wash cycle. The customer was seeing an E11 error code for long fill, and hot water wasn’t activating in normal wash. After resetting error codes, the washer appears to be operating correctly. The Problem The customer reported that their Kenmore washer won’t run water … Read more
A Whirlpool washer in Homeworth developed a locked lid that wouldn’t unlock. Our diagnosis revealed significant damage to the control board that made repair impractical for this older unit. The Problem The customer reported that the lid is locked and won’t unlock. This prevented normal operation of the washer, leaving laundry stranded inside the machine. … Read more
The dryer was spinning but not heating. Replacing the heat element resolved the issue.
A customer in Homeworth called when their Admiral dryer quit working completely. We diagnosed a failed thermostat on the heat element assembly and restored normal operation with a replacement part. The Problem The customer reported that their dryer quit. The unit would not produce heat or complete cycles properly. Diagnosis We found the thermostat on … Read more