Samuel responded to a service call on Fairmount Blvd NE in Canton, OH, where a Whirlpool wall oven (model WOS51EC0AS) had locked out all cooking features after a household brown-out. A stored fault code pointed to an EEPROM lockup, and a power cycle at the breaker brought the control back to normal operation with no … Read more
Samuel was on a service call on Lake O’Springs Avenue Northwest in North Canton when an LG gas range came in with a dead oven. The burners were working fine, but the oven itself had stopped heating. The culprit turned out to be a weak bake igniter, and the repair was completed the same visit. … Read more
On a service call to Louisville, OH, Samuel Willhite diagnosed a Whirlpool gas oven (model WFG231LVS1) that wasn’t reaching the correct baking temperature. The culprit was a weak bake igniter drawing below spec, and the repair had the oven lighting properly before the call was finished. The Problem Oven not heating to correct temperature; customer … Read more
On a service call to Valleyview Ave NW in Canton, OH, Samuel Willhite diagnosed a Forza gas oven that had stopped heating. The broil element was working fine, but the igniter tested open and would not power on. Replacing the igniter brought the oven back to full operation. The Problem Oven not heating The Repair … Read more
Louisville Appliance Repair recently completed a service call on Mayfair Rd in Uniontown, OH, where a customer reported that their FORNO FFSGS6276-30 gas oven would not light and was running at the wrong temperature. Samuel visited the home, tested the unit, and found no fault with the oven itself. After demonstrating the correct operating procedure … Read more
We completed an oven repair on Gulf Street NW in Uniontown, OH for a Samsung gas oven that wouldn’t light. The customer reported that surface burners were working fine, but the oven itself wouldn’t ignite. Our diagnosis revealed a failed bake igniter that needed replacement. The Problem Oven not lighting. Surface burners fine. Diagnosis Bake … Read more
The range was unresponsive with no lights or sounds. An electrician was needed to check the house wiring.
The oven was not heating properly, with flickering display lights and a constant clicking sound. It is now operating correctly.
The Kenmore gas range couldn’t bake due to a broken oven door lock. After replacing the lock, the oven is now fully operational.
The oven wouldn’t light, but after replacing the igniter, it was restored to full functionality.