On a service call to Valleyview Ave NW in Canton, OH, Samuel Willhite diagnosed a Forza gas oven that had stopped heating. The broil element was working fine, but the igniter tested open and would not power on. Replacing the igniter brought the oven back to full operation. The Problem Oven not heating The Repair … Read more
Louisville Appliance Repair recently completed a service call on Mayfair Rd in Uniontown, OH, where a customer reported that their FORNO FFSGS6276-30 gas oven would not light and was running at the wrong temperature. Samuel visited the home, tested the unit, and found no fault with the oven itself. After demonstrating the correct operating procedure … Read more
We completed an oven repair on Gulf Street NW in Uniontown, OH for a Samsung gas oven that wouldn’t light. The customer reported that surface burners were working fine, but the oven itself wouldn’t ignite. Our diagnosis revealed a failed bake igniter that needed replacement. The Problem Oven not lighting. Surface burners fine. Diagnosis Bake … Read more
The range was unresponsive with no lights or sounds. An electrician was needed to check the house wiring.
The oven was not heating properly, with flickering display lights and a constant clicking sound. It is now operating correctly.
The Kenmore gas range couldn’t bake due to a broken oven door lock. After replacing the lock, the oven is now fully operational.
The oven wouldn’t light, but after replacing the igniter, it was restored to full functionality.
The oven failed to heat after a power outage, but the issue was resolved by replacing the control board.
The lower oven element was broken and needed replacement. After installation, the oven operated normally.
The oven was not heating, but the broiler and burners were functional. Replacing the oven igniter resolved the issue.