LG Washer Repair (Model WT4801CW) – Hartville, OH
The washer was making a grinding noise during cycles, which was resolved by replacing the bearing housing assembly.
The washer was making a grinding noise during cycles, which was resolved by replacing the bearing housing assembly.
The washer displayed an OE error and failed to drain, preventing it from completing cycles. The water pump was replaced to resolve the issue.
The LG dryer was not heating despite turning on and spinning. A faulty high limit thermostat was replaced, restoring heat functionality.
The washer was leaking more than usual, and the dryer displayed a d80 error code. We replaced the drain hose and referred the customer for vent cleaning.
The oven failed to heat to the requested temperature and often shut off. Replacing the igniter resolved the issue.
Washer would not drain or spin and made noise. Replaced failed drain pump to restore proper draining and spin.
This LG washer in Uniontown, OH showed an OE error and wouldn’t drain due to a failed drain pump. Replacing the pump restored proper draining and quieter cycles.
LG washer WT7600HWA would not drain. Replacing the failed drain pump restored proper draining and completed cycles.
After a self-clean cycle, the upper oven stopped heating while the lower oven still worked. Replacing the failed high-limit thermostat restored normal preheat in about 10 minutes.
Cooling was fine but the freezer evaporator fan was noisy. Replaced the fan assembly with an updated heater-equipped unit to prevent icing and restore quiet operation.