Samuel was on a service call to Englewood Dr NE in Canton, OH for an LG dryer making a loud noise during tumbling. The dryer continued to operate but the noise had been going on for about a week. After diagnosing the unit, Samuel found the source of the problem and completed the repair. The … Read more
Samuel made a service call to Camp Blvd in Hanoverton, OH on a refrigerator that had stopped cooling entirely. After running LG’s diagnostic protocol and performing resistance testing at the compressor terminals, he confirmed an open compressor winding, a classic sign of internal compressor failure. Because this LG refrigerator falls under LG’s 10-year compressor warranty, … Read more
On a service call to Spruce Haven Street Northwest in Uniontown, OH, Samuel found an LG refrigerator that had lost cooling in both the freezer and fresh food sections. A diagnosis confirmed compressor failure, and the customer decided to replace the unit rather than pursue further repair. The Problem Freezer stopped working two days ago, … Read more
A front-load LG washer on Whittier Avenue Northwest in North Canton was throwing a tE error code and had stopped working. Samuel traced the issue to the temperature sensor and a damaged harness at the sensor plug, getting the machine back in service the same visit. The Problem Front load washer showing error code tE, … Read more
On a service call to Canton, OH, Samuel Willhite found an LG refrigerator displaying an FFE error code, with the freezer holding temperature but the fresh food section running warm. The culprit was a locked-up freezer fan motor, and once that was replaced, both compartments returned to normal. The Problem Refrigerator not cooling — freezer … Read more
On a service call to Malvern, OH, Samuel found a sticky power button on an LG washer (model WM4270HVA) that required multiple presses before the machine would respond. After disassembling and cleaning the button mechanism, the control was restored to normal operation. The Problem Power button sticks, requires multiple presses to turn on The Repair … Read more
Samuel made a service call to Rabbit Ridge in Canfield, OH on an LG refrigerator that had stopped cooling in both compartments. The compressor was running sporadically and running hot, pointing to a refrigerant leak or restriction rather than a simple electrical fault. The Problem Refrigerator not cooling in either compartment, likely compressor issue The … Read more
On a service call to North Canton, OH, Samuel Willhite found an LG top load washer that had stopped agitating, leaving clothes sitting in water with barely any movement from the agitator. After diagnosing the unit, Samuel replaced the agitator and the washer was back in working order. The Problem Top load washer not agitating … Read more
On a service call to Canton, OH, Samuel Willhite diagnosed an LG range that would not complete its preheat cycle, throwing an F9 error code every time the oven was used. The surface burners were working fine, pointing to a bake-side issue. The faulty bake igniter was confirmed and replaced, restoring normal oven operation. The … Read more
On a service call to Fairhaven Ave NW in Canton, OH, Samuel found an LG refrigerator that had stopped cooling in both the fridge and freezer compartments. A three-blink fault code pointed to a failed compressor, and after diagnosis confirmed an open compressor winding, the unit was deemed not economically repairable. The Problem Refrigerator not … Read more