On a service call to Chapple Hill Dr NE in North Canton, Samuel found a Samsung dishwasher with a door that would swing open on its own, the result of a failed door hinge cord. The cord was replaced and the dishwasher was returned to proper operation. The Problem Dishwasher door swings open. There is … Read more
Samuel installed a new Miele dishwasher on a service call in Canton, OH, completing the installation and verifying everything was in working order. The unit is ready to run, with one follow-up item noted for the customer regarding the built-in water softener. The Problem Installing new dishwasher The Repair Installed new dishwasher. Everything looks good. … Read more
Samuel handled a dishwasher repair on Johnstown Road Northeast in Dover, OH, where a Thor HDW2401SS was throwing an E4 error code and leaking water out the front. The culprit turned out to be a completely blocked drain hose, and the unit was back in working order by the end of the service call. The … Read more
A GE dishwasher on Edith St in Louisville, OH had been sporadically beeping even after a motherboard and door latch replacement. Samuel found an error code indicating the control board was resetting repeatedly, and a software update was available to address the issue. The Problem Dishwasher sporadically beeping; motherboard and door latch already replaced, issue … Read more
On a service call to Louisville, OH, Samuel found a Whirlpool dishwasher that had stopped receiving water. The culprit turned out to be a small but critical rocker piece between the float and float switch that had been removed and set aside. Once it was reinstalled, the unit was back to washing, draining, and heating … Read more
Samuel visited a home on Pine St NW in Uniontown, OH on a service call for a Samsung dishwasher that would not power on. After testing voltage through the door and tracing the issue to the user interface board, the diagnosis was confirmed but the part is no longer available, leaving replacement as the only … Read more
On a service call to Louisville St NE in Louisville, OH, Samuel found a Whirlpool dishwasher that would not power on at all. The controls were completely unresponsive, and the issue traced back to the power supply rather than the appliance itself. The next step was handed off to an electrician to restore proper power … Read more
On a service call to Armandale Ave NW in Canton, a Jenn-Air dishwasher was producing a burning smell from the rack area. Samuel assessed the situation, documented the damage, and submitted a repair quote to the warranty company covering all affected components. The Problem Rack smells like it’s burning The Repair Filled out form for … Read more
On a service call to North Canton, OH, Samuel found a Whirlpool dishwasher that had been struggling to clean dishes despite clean filters and previously replaced sprayers. The lower spray arm was not properly clicked into place, and replacing it with the updated version brought the unit back to full performance. The Problem Dishwasher not … Read more
On a service call to Beaconfield St NW in Uniontown, OH, Samuel Willhite inspected a Kenmore dishwasher (model 665.13293K112) that was leaking from the wash pump area. After diagnosing a loose elbow connection and an improperly installed pump, Samuel determined the unit needed a full sump and pump assembly replacement. Given the dishwasher’s age, the … Read more