Samuel was on a service call on Overridge Ave SE in North Canton, OH, where a Whirlpool top-load washer (model WTW7040DW0) had been throwing an F8E1 long fill error and eventually stopped filling altogether. The water valve was replaced and the washer was back in service. The Problem I got a long fill error a … Read more
On a service call to Canton, OH, Samuel diagnosed a Whirlpool top-load washer that had stopped agitating and was producing a clicking sound during the cycle. The shift actuator had failed, and replacing it brought the machine back to full operation, confirmed by a passed auto diagnostic test and calibration. The Problem Washer is a … Read more
On a service call to Louisville, OH, Samuel found a Whirlpool refrigerator (model WRF535SMBM00) with a door gasket that was no longer sealing correctly. After replacing the right-hand door gasket, the refrigerator was back in working order. The Problem Door gasket isn’t sealing correctly The Repair Replaced RH door gasket. Good to go. Parts replaced: … Read more
Samuel made a service call to a home on Oakfield Street in East Canton, OH to look at a Whirlpool washer that had stalled on the sensing cycle and would not move forward. No parts were needed. After running the auto diagnostic cycle, the unit was washing normally before Samuel left, and a follow-up call … Read more
On a service call to Canton, OH, Samuel Willhite found a Whirlpool bottom freezer refrigerator leaking water out the front of the freezer compartment, with the defrost drain freezing over repeatedly. After clearing the ice buildup and addressing the drain, the unit was back in working order. The Problem Bottom freezer refrigerator leaking out front … Read more
A Whirlpool dryer on Buck Road in Alliance, OH was vibrating after the homeowner cleaned the lint trap. Samuel found a blower wheel packed with lint and cracked, replaced it, and the dryer ran smoothly again. The Problem Dryer is vibrating after cleaning lint trap The Repair Blower wheel was plugged with lint and cracked. … Read more
On a service call to Louisville, OH, Samuel found a Whirlpool dishwasher that had stopped receiving water. The culprit turned out to be a small but critical rocker piece between the float and float switch that had been removed and set aside. Once it was reinstalled, the unit was back to washing, draining, and heating … Read more
On a service call to Louisville, OH, Samuel Willhite diagnosed a Whirlpool washer that wouldn’t shut off after completing a cycle and had stopped finishing full wash cycles. The culprit was an F3E2 error code pointing to the main control board, which was replaced to restore normal operation. The Problem Whirlpool Washer Pump won’t shut … Read more
On a service call to Louisville St NE in Louisville, OH, Samuel found a Whirlpool dishwasher that would not power on at all. The controls were completely unresponsive, and the issue traced back to the power supply rather than the appliance itself. The next step was handed off to an electrician to restore proper power … Read more
A Whirlpool dryer on 2nd St SE in Canton, OH was taking longer than normal to dry clothes, though it was still producing heat. Samuel Willhite visited the home and found a blocked lint duct as the cause. A quick clearing of the obstruction had the dryer running properly again, no parts needed. The Problem … Read more