A Paris, OH customer called about her Maytag washer starting to make noises and then stopping mid-spin. When we pulled the diagnostic code and traced the issue back to the water inlet, the culprit turned out to have nothing to do with the washer itself — it was a freshly installed water softener hooked up … Read more
Samuel recently visited a customer on Beechwood Ave in Paris, OH, to look at a Whirlpool front-load washer, model WFW9200SQ00, that would fill with water and then shut down after the door locked. The inspection revealed a failed drain pump and a leaking door boot. After reviewing the findings, the customer decided to replace the … Read more
The dryer was running but not heating and would stop before completing the cycle. Replacing the heating element assembly resolved the issue.
The dryer selection no longer turned properly and it wouldn’t turn on. Replacing the timer knob fixed the issue.
The refrigerator’s ice maker and water valve were replaced to restore functionality.
A Paris, Ohio customer called with two appliances down — a newer GE washer that wouldn’t drain and an older Kenmore dryer that wouldn’t do anything. We found one simple winter problem and one failed safety component. The Problem The customer reported that the washer is newer and won’t drain. The older dryer, he said … Read more
We got a call from Paris, OH about an Admiral range where the oven lock was sticking out and the door couldn’t shut because of it. The customer had been baking pizzas at 400 degrees for about 2 hours when the lock mechanism got stuck in the extended position after they tried to turn off … Read more
The timer in the dryer was loose, causing operational issues. Reinstalling the timer resolved the problem.
The washer displayed an error code ‘drn’ indicating drainage issues. After replacing the drain pump, the washer is now functioning properly.
The Electrolux washer displayed error codes 32 and 21, making a grinding noise and failing to drain. Replacing the drain pump resolved the issue.