Whirlpool Dryer Repair (Model 110.61202011) – Canton, OH

A homeowner in Canton called us about their Whirlpool dryer that stopped heating completely. The model 110.61202011 would run through cycles but clothes came out damp every time. After testing the unit, we traced the issue to a failed timer that wasn’t advancing the heating sequence properly.

The Problem

The dryer would tumble and complete cycles, but produced zero heat throughout the process. The customer had been running multiple cycles to get clothes dry, which wasn’t working and was wasting energy. All other functions appeared normal — the drum turned, the door latched properly, and the unit responded to controls.

Diagnosis

We tested the heating element and found it was receiving no power during the heat portion of the cycle. The timer wasn’t advancing through its heating contacts, which meant the element never received the signal to turn on. This is a common failure point on this Whirlpool model where the timer’s internal contacts wear out over time and stop making proper electrical connections.

The Repair

• Parts replaced: WPW10186032 — timer assembly
• Work performed: Removed old timer, installed new unit, reconnected all wire harnesses
• Result: Ran full cycle with proper heat production and verified temperature control

Is It Worth Repairing?

This Whirlpool model is from their reliable 110 series that typically runs 15+ years with proper maintenance. A timer replacement on a unit this age makes economic sense since the rest of the components are likely still in good condition. These dryers are built solid and worth keeping operational.

Maintenance Tips for Whirlpool Dryers

• Clean the lint screen after every load — clogged screens force the timer to work harder and can cause premature failure
• Check the exhaust vent annually for blockages that create back-pressure and stress internal components
• Wipe down the timer knob area monthly to prevent lint buildup that can interfere with electrical contacts

Appliance Repair in Canton, OH

Canton is in Stark County — an area we cover regularly from our base in Louisville, OH. We also serve North Canton, Alliance, and Massillon. Louisville Appliance Repair is owned and operated by Samuel Willhite, a master-certified technician with Bosch and Speed Queen factory authorizations. If your appliance needs service, schedule online or call (330) 693-9163. You can also find us on Google and read verified reviews from customers across Stark County and surrounding areas.