Maytag Dishwasher Repair (Model MDB4949SDZ0) – Canton, OH
In Canton, OH, a dishwasher that won’t fill leaves dishes dirty and cycles incomplete. Quick repairs keep Stark County kitchens running smoothly.
- Complaint: Unit wouldn’t fill beyond about 1/2 inch during a cycle.
- Cause: Failed control board not sending power to inlet valve.
- Fix: Replaced main control board and verified valve activation.
- Result: Normal fill restored; cycles wash and clean properly.
Diagnostic Findings
- Confirmed low water level during fill
- Water supply on; inlet screen and float clear
- No 120V output to valve from control
- Replaced control board and ran diagnostics
- Unit fills to proper level and proceeds
DIY? Read This First — Unplug the appliance and disconnect utilities before attempting repairs.
Disclosure: Some links below are affiliate (“sponsored”). We may earn a small commission.
Repairs Performed
Typical repair range: $353.97–$453.97.
If the repair cost approaches 50% of a new unit, it may be worth exploring replacement options.
Maintenance Tips for Appliances
- Clean the dishwasher filter monthly.
- Inspect the inlet screen and float for debris.
- Stark County hard water: use rinse aid and periodic citric-acid cleans.
- Run hot water at the sink before starting a cycle.
Final Verification
We completed functional tests to verify proper operation and checked for leaks, errors, and responsiveness.
Schedule service · Read reviews · Find parts
Disclosure: Some links are affiliate (“sponsored”). We may earn a commission.