Whirlpool Refrigerator Repair (Model GI5SVAXVL01) – Alliance, OH
The front dispenser and controls were unresponsive due to a failed main control board. Replacing the board restored normal dispensing and cooling.
control board
Admiral Washer Repair (Model WA42T26GW1) – North Canton, OH
Washer lost power and would only run briefly after a reset. Replacing the main control board restored stable operation.
Maytag Dishwasher Repair (Model MDB4949SDZ0) – Canton, OH
Dishwasher wouldn’t fill, leaving cycles stalled. Replaced the main control board to restore proper water fill and operation.
JennAir Range Repair (Model JER8885QAS) – North Canton, OH
Range was non-responsive due to a failed control board. Replaced the board and verified normal heating.
Frigidaire Range Repair (Model FEF336ECE) – Alliance, OH
Oven was dead due to a failed clock/control board. Replaced the control panel/board and restored normal operation.
LG Washer Repair (Model WT1101CW) – Malvern, OH
Washer would not drain and showed OE error. A failed drain pump and a control board not sending power were replaced to restore proper draining.
GE Dishwasher Repair (Model DDT595SMJ0ES) – Waynesburg, OH
Dishwasher powered on but wouldn’t start. Main control board had 120V but no response; replacing the control restored normal operation.
Pelpro Pellet Stove Repair (Model PP60) – Louisville, OH
The stove would not power up or feed pellets due to a failed control potentiometer interface. We installed a new control board and cleared an auger jam, restoring normal operation.
Samsung Dryer Repair (Model DVE52M7750V/A3) – Louisville, OH
Dryer ran continuously after cycles due to a stuck relay on the control board. Replaced the control board and door switch to restore proper shutoff.
GE Dishwasher Repair (Model GDF520PGJ2WW) – Louisville, OH
The GE dishwasher would not power on. Replacing the UI and main control boards restored operation; unit tests good.