KitchenAid Dishwasher Repair (Model KUDS30IXBT6) – Canton, OH

A Canton homeowner called with a KitchenAid dishwasher that would start a cycle, run for just a few minutes, then jump to cancel/dry mode and shut off completely. After testing the unit and checking power supply stability, we traced the issue to a failed main control board — a common failure point on this KUDS30IXBT6 model.

The Problem

The dishwasher would begin any selected cycle normally but would abort after only a few minutes of operation. Instead of continuing through the wash phases, it would automatically switch to cancel/dry mode and shut down. The control panel displayed intermittent error codes, and the unit became completely unresponsive until reset.

Diagnosis

We verified stable power supply to the unit and checked all door latches and sensors for proper operation. The premature cycle termination combined with the erratic control panel behavior pointed directly to main control board failure. This electronic control module manages all cycle timing, water temperature monitoring, and motor sequencing — when it fails, the dishwasher cannot complete normal wash operations.

The Repair

• Parts replaced: W11035586 — main electronic control board
• Work performed: Disconnected power, removed old control board, installed new board, reconnected all wiring harnesses
• Result: Ran complete normal cycle with proper water heating, spray arm operation, and drain function

Is It Worth Repairing?

This KitchenAid KUDS30IXBT6 is a solid mid-range dishwasher that typically provides 10-12 years of service when properly maintained. Control board replacement on a unit this age is usually worthwhile, as the pumps, motors, and wash system components remain in good condition. These dishwashers are well-built and this repair should provide several more years of reliable operation.

Maintenance Tips for KitchenAid Dishwashers

• Clean the triple-filter system monthly — this model has a cylindrical filter assembly that unscrews from the bottom rack area
• Run KitchenAid’s ProScrub cycle with dishwasher cleaner quarterly to prevent mineral buildup on the wash arms
• Check and clean the door seals where food particles can accumulate and cause drainage issues specific to this model’s design

Appliance Repair in Canton, OH

Canton is in Stark County — an area we cover regularly from our base in Louisville, OH. We also serve Massillon, Alliance, and North Canton. Louisville Appliance Repair is owned and operated by Samuel Willhite, a master-certified technician with Bosch and Speed Queen factory authorizations. If your appliance needs service, schedule online or call (330) 693-9163. You can also find us on Google and read verified reviews from customers across Stark County and surrounding areas.