A Whirlpool dishwasher in Akron was not draining properly, leaving 1-2 inches of water after each cycle. Our diagnosis revealed a round plastic piece plugging the drain hose that was preventing normal water evacuation. The Problem The customer reported their dishwasher was not draining, with 1-2 inches of water remaining after the cycle completed. This … Read more
A Whirlpool dishwasher in North Canton wasn’t running properly — it said it was running but water wasn’t going into the parts to spin. We found the water circulation pump had failed, preventing proper water flow throughout the wash cycle. The Problem The dishwasher will not run. It says that it’s running but the water … Read more
A Canton homeowner called when a part on the left side broke off of the top rack making it inoperable to slide in & out. The dishwasher still ran, but loading dishes became impossible with a stuck top rack. The Problem A part on the left side broke off of the top rack making it … Read more
We responded to a service call in Carrollton, OH for a Whirlpool dishwasher that had come loose from the counter and wouldn’t latch properly. The dishwasher brackets had failed, causing the entire unit to shift out of position. The Problem The customer reported that their dishwasher had come loose from the counter and needed refastened. … Read more
A Whirlpool dishwasher in Canal Fulton was running water but not washing dishes. The circulation pump had failed, preventing proper water circulation throughout the wash cycle. The Problem The customer reported that water runs but not washing. The dishwasher would fill with water during the cycle, but dishes remained dirty because the water wasn’t circulating … Read more
A homeowner in North Lawrence, OH called us about their Whirlpool dishwasher that had water not draining out. When we arrived at the Sousa Street home, we discovered the drain line was plugged with a piece of plastic that was blocking proper drainage. The Problem The customer reported that water was not draining out of … Read more