Frigidaire Range Repair (Model FEF336ECE) – Alliance, OH

A Frigidaire range in Alliance, OH went completely dead — no display, no response from any controls. The customer called when their oven wouldn’t heat and the entire control panel stayed blank. Our diagnosis revealed a failed control board that had lost all power output to the range’s heating elements and display.

The Problem

The customer reported their Frigidaire range was completely unresponsive. The digital display was blank, none of the touch controls worked, and the oven wouldn’t heat at all. The range appeared to have no power, though it was properly plugged in and the circuit breaker hadn’t tripped.

Diagnosis

We found proper line voltage at the terminal block, confirming power was reaching the unit. However, the control board wasn’t producing any low-voltage output to operate the display or heating elements. The clock/control board assembly had failed completely, cutting power to all range functions. This is a common failure point on this Frigidaire model, especially as the unit ages and electronic components wear out.

The Repair

• Parts replaced: 5304518660 — Control panel/control board assembly
• Work performed: Disconnected power, removed old control board, installed new assembly, reconnected wiring
• Result: Display powered on, all controls responsive, bake and broil cycles tested successfully

Is It Worth Repairing?

This Frigidaire model FEF336ECE is a solid mid-range electric range that typically lasts 12-15 years with proper care. If your unit is under 10 years old, replacing the control board is usually the right call. The repair restores full functionality and these ranges generally don’t have other major failure points once the control board is replaced.

Maintenance Tips for Frigidaire Electric Ranges

• Keep the control panel dry — moisture can damage the electronic components that failed in this repair
• Use the oven vent properly during baking to prevent humidity buildup around the control board
• Clean spills from the control area immediately, especially around the touch controls where liquid can seep in

Appliance Repair in Alliance, OH

Alliance is in Stark County — an area we cover regularly from our base in Louisville, OH. We also serve Canton, North Canton, and Hartville. Louisville Appliance Repair is owned and operated by Samuel Willhite, a master-certified technician with Bosch and Speed Queen factory authorizations. If your appliance needs service, schedule online or call (330) 693-9163. You can also find us on Google and read verified reviews from customers across Stark County and surrounding areas.