Admiral Washer Repair (Model WA42T26GW1) – North Canton, OH
In North Canton, OH, a dead washer can halt laundry for the whole household. This power failure was traced to the control system to keep a Stark County home on track.
- Complaint: Washer wouldn’t power on; after unplugging, it started briefly then shut off.
- Cause: Failed main control board power circuit.
- Fix: Replaced main control board and verified connections.
- Result: Stable power-up and full cycles restored.
Diagnostic Findings
- No display or response on power-up
- After reset, runs about 10 seconds then dies
- 120V supply good at outlet and to board
- No DC logic voltage output from control
- Lid switch and wiring tested good
DIY? Read This First — Unplug the appliance and disconnect utilities before attempting repairs.
Disclosure: Some links below are affiliate (“sponsored”). We may earn a small commission.
Repairs Performed
Typical repair range: $373.76–$473.76.
If the repair cost approaches 50% of a new unit, it may be worth exploring replacement options.
Maintenance Tips for Appliances
- Use proper load sizes to avoid overworking the motor.
- Clean inlet screens and run a monthly washer clean cycle.
- Stark County hard water can cause buildup—use cleaner or a softener.
- Plug into a quality surge protector to protect control boards.
Final Verification
We completed functional tests to verify proper operation and checked for leaks, errors, and responsiveness.
Schedule service · Read reviews · Find parts
Disclosure: Some links are affiliate (“sponsored”). We may earn a commission.