Frigidaire Oven Repair (Model FGFL66ASA) – Canton, OH

We recently serviced a Frigidaire gas range in Canton that wouldn’t heat in oven mode. The customer could use the stovetop burners just fine, but the oven stayed cold no matter how long they waited. Our diagnosis revealed a failed oven igniter — a common failure point on this model.

The Problem

The homeowner reported their oven wouldn’t heat at all. They could hear the gas valve trying to open when they set the oven temperature, but no ignition occurred. The broiler worked normally, and all four stovetop burners lit without issue, which pointed us toward the main oven igniter circuit.

Diagnosis

We removed the oven bottom panel and found the igniter glowing weakly orange instead of the bright white it needs for proper operation. Over time, these silicon carbide igniters develop internal resistance that prevents them from drawing enough current to open the gas safety valve. The igniter was drawing insufficient amperage to signal the valve, so while it would glow dimly, it couldn’t complete the ignition sequence.

The Repair

• Parts replaced: 5303935066 — oven igniter kit with mounting hardware
• Work performed: Removed old igniter, installed new unit with proper electrical connections and bracket alignment
• Result: Oven now ignites within 60 seconds and maintains temperature accurately throughout the cycle

Is It Worth Repairing?

This Frigidaire model FGFL66ASA is a solid mid-range gas range that typically runs 10-15 years with proper maintenance. An igniter replacement is a straightforward repair that restores full functionality, making it worthwhile unless the unit is already showing multiple system failures or significant cosmetic deterioration.

Maintenance Tips for Frigidaire Gas Ranges

• Clean spills from the oven floor immediately — acidic foods can corrode the igniter bracket over time
• Keep the igniter area free of debris and avoid using abrasive cleaners on the sensor portion
• Test the oven ignition monthly — if it takes longer than 90 seconds to light, the igniter is beginning to fail

Appliance Repair in Canton, OH

Canton is in Stark County — an area we cover regularly from our base in Louisville, OH. We also serve Massillon, North Canton, and Alliance. Louisville Appliance Repair is owned and operated by Samuel Willhite, a master-certified technician with Bosch and Speed Queen factory authorizations. If your appliance needs service, schedule online or call (330) 693-9163. You can also find us on Google and read verified reviews from customers across Stark County and surrounding areas.