Speed Queen Washer Repair (Model SWNSX2SP112TW01) – Canton, OH

A Speed Queen washer in Canton wouldn’t complete its wash cycles, leaving clothes soaking wet and the homeowner frustrated. When we arrived, we found a locked-up drain pump that had also caused the drive belt to burn out from the strain.

The Problem

The customer reported their Speed Queen washer would start normally but wouldn’t finish cycles. Water remained in the tub, and the machine would eventually stop mid-cycle with clothes still submerged. The washer had been getting progressively worse over several weeks before finally failing completely.

Diagnosis

Testing revealed the drain pump had seized completely — likely from accumulated debris or long-term wear. The locked pump created excessive resistance on the drive system, causing the agitate and spin belt to overheat and fail. Without a functioning pump, water couldn’t evacuate the tub, and without the belt, the washer couldn’t complete its mechanical operations.

The Repair

  • Parts replaced: 205217P pump assembly and 38174 agitate/spin belt
  • Work performed: Removed old pump, installed new pump assembly, replaced burnt drive belt, cleared drain lines
  • Result: Ran full test cycle with proper drainage and spin function restored

Is It Worth Repairing?

Speed Queen washers are built for 25+ year lifespans with proper maintenance. This SWNSX2SP112TW01 model is from their residential line with commercial-grade components. Unless the unit is showing multiple system failures or extensive rust damage, pump and belt replacement typically extends service life significantly.

Maintenance Tips for Speed Queen Washers

  • Check drain pump filter monthly — Speed Queen models access through front lower panel
  • Run tub clean cycle with Speed Queen-approved cleaner every 30 loads to prevent buildup
  • Inspect agitate/spin belt annually for cracking or glazing — belt wear accelerates pump failure

Appliance Repair in Canton, OH

Canton is in Stark County — an area we cover regularly from our base in Louisville, OH. We also serve Massillon, North Canton, and Alliance. Louisville Appliance Repair is owned and operated by Samuel Willhite, a master-certified technician with Bosch and Speed Queen factory authorizations. If your appliance needs service, schedule online or call (330) 693-9163. You can also find us on Google and read verified reviews from customers across Stark County and surrounding areas.

Need appliance repair in Canton or nearby?
Louisville Appliance Repair serves Stark County and surrounding areas.
Schedule your repair online,
call (330) 693-9163,
or see our reviews on Google.
—+ · Verified Reviews