Whirlpool Dishwasher Repair (Model 665.13549N414) – Canton, OH

A Canton homeowner called about their Whirlpool dishwasher leaking from both sides of the door during wash cycles. We discovered the door wasn’t sealing properly due to a worn spray arm that was causing excessive water pressure against the door seals.

The Problem

The customer reported water pooling on the kitchen floor after every wash cycle, with leaks visible along both sides of the dishwasher door. The leaking had gotten progressively worse over several weeks, making the appliance unusable without constant cleanup.

Diagnosis

Our inspection revealed the door seals were actually in good condition, but the spray arm (part W10849471) was partially clogged and creating uneven water pressure. This irregular spray pattern was forcing water against the door seals at angles they weren’t designed to handle, causing the leaks at both door edges. The door locking mechanism was also not engaging fully due to warping from the excess moisture exposure.

The Repair

• Parts replaced: W10849471 — lower spray arm assembly
• Work performed: Removed old spray arm, cleaned spray arm housing, installed new assembly, adjusted door alignment
• Result: Ran full wash cycle with no leaks detected, door sealing properly

Is It Worth Repairing?

This Whirlpool 665.13549N414 is a mid-range model that typically runs 10-12 years with proper maintenance. Since this was primarily a spray arm issue rather than major component failure, the repair extends its useful life significantly. These units are generally worth repairing unless multiple systems are failing simultaneously.

Maintenance Tips for Whirlpool Dishwashers

• Remove and rinse the lower spray arm monthly to prevent food particle buildup that can cause uneven water pressure
• Check the door seals every few months for food debris or mineral deposits that can prevent proper sealing
• Run an empty cycle with dishwasher cleaner quarterly to remove grease and mineral buildup from internal components

Appliance Repair in Canton, OH

Canton is in Stark County — an area we cover regularly from our base in Louisville, OH. We also serve North Canton, Alliance, and Massillon. Louisville Appliance Repair is owned and operated by Samuel Willhite, a master-certified technician with Bosch and Speed Queen factory authorizations. If your appliance needs service, schedule online or call (330) 693-9163. You can also find us on Google and read verified reviews from customers across Stark County and surrounding areas.