Dishwasher Repair in Louisville, OH

Not cleaning, not draining, leaking, or stopping mid-cycle? I’ll diagnose the problem, explain your options clearly, and only proceed once you approve — backed by a 6-month labor warranty.

Same-day service when available • Upfront diagnosis • Serving Louisville, OH & nearby communities

Common Dishwasher Problems I Fix

These are the most common dishwasher issues I diagnose in Louisville-area homes:

Not cleaning dishes

Circulation/wash motor issues, spray arm blockage, filter restriction, or water supply problems.

Not draining

Drain pump, drain hose restrictions, disposer/air-gap clogs, or control-related drain problems.

Leaking water

Door seal, float/overfill issues, valve problems, cracked fittings, or tub-to-pump seal leaks.

Not drying

Heating circuit, vent/fan, thermostat/sensor issues, or rinse-aid related performance problems.

Stops mid-cycle

Door latch/switch, control board, sensors, or water fill/heating faults that interrupt the cycle.

Error codes

Brand-specific diagnostics to pinpoint the cause instead of guessing.

Owner-Operated Dishwasher Repair

Sam Willhite, owner and technician at Louisville Appliance Repair

Sam Willhite — Owner & Technician

“Dishwasher problems usually come down to water fill, wash circulation, draining, or heat. I test those systems so you get the right fix — not a parts swap guess.”

Want proof? See our reviews.

Recent dishwasher repairs

Below are real dishwasher service visits we’ve completed locally. If you’re dealing with something similar, book online and we’ll take care of it.

Frigidaire Dishwasher Repair (Model LFBD2409LF3C) – Louisville, OH

Dishwasher wouldn't drain after a cycle due to glass obstructing the drain hose. Clearing the hose restored normal draining.

KitchenAid Dishwasher Repair (Model KUDK03CTSS3) – Louisville, OH

Intermittent leaking from the dishwasher door was traced to worn seals. Replacing the door gasket and bottom door seal stopped the leaks.

KitchenAid Dishwasher Repair (Model KDTE234GPS0) – Alliance, OH

The dishwasher wouldn't drain and left debris on dishes. Clearing debris from the drain pump and cleaning the lower spray arm restored proper washing…

Samsung Dishwasher Repair (Model DW7933LRASR/AA) – Alliance, OH

Heavy and Smart Auto lights were flashing due to an obstruction in the case brake water level sensor. Clearing the sensor and sump hose…

Samsung Dishwasher Repair (Model DW7933LRASR/AA) – Alliance, OH

The Samsung dishwasher showed flashing Heavy and Smart Auto lights due to a blockage in the case brake water level sensor assembly. Clearing the…

Whirlpool Dishwasher Repair (Model WDT970SAHV0) – Alliance, OH

The Whirlpool dishwasher was not cleaning due to a clogged middle spray arm. We cleared the blockage and restored proper spray and wash performance.

GE Dishwasher Repair (Model GDT695SMJOES) – North Canton, OH

The GE dishwasher wouldn't start and the lock light flashed. A tripped CSM safety module was reset and the filter, float sensor, and sump…

Amana Dishwasher Repair (Model ADB1500AWB) – Canton, OH

Broken door latch kept this Amana dishwasher in Canton from closing and starting. Replaced the latch assembly and restored normal operation.

Maytag Dishwasher Repair (Model MDB4949SDZ0) – Canton, OH

Dishwasher wouldn’t fill, leaving cycles stalled. Replaced the main control board to restore proper water fill and operation.

Whirlpool Dishwasher Repair (Model WDT710PAYM5) – Salem, OH

Dishwasher didn’t spray from the mid or top arms and made a grinding/humming noise. Replacing the wash pump restored full spray and normal sound.

KitchenAid Dishwasher Repair (Model KUDC10FXBL1) – North Canton, OH

Dishwasher wasn’t getting sufficient water to the upper spray arm due to a clogged food grinder screen. Clearing the screen restored proper cleaning.

GE Dishwasher Repair (Model DDT595SMJ0ES) – Waynesburg, OH

Dishwasher powered on but wouldn't start. Main control board had 120V but no response; replacing the control restored normal operation.

See more dishwasher repair posts here: /blog/tag/dishwasher/

Brands I Commonly Service

I work on most major dishwasher brands including Whirlpool, KitchenAid, Maytag, GE, Bosch, Samsung, LG, Frigidaire, Electrolux, Amana, Kenmore, and more.

KitchenAid dishwasher repair in Louisville, Ohio

Clean dishes again — without repeat problems

Symptoms can overlap (for example, “not cleaning” can actually be a fill problem). Diagnosis tells us what’s failing so you don’t waste money on the wrong fix.

Quick Maintenance Tips

Check the filter

A dirty filter can cause poor cleaning and even drainage issues.

Spray arms matter

Clogged spray arm holes reduce wash pressure and leave dishes dirty.

Use rinse aid

Helps drying performance and reduces spotting, especially on plastics.

Dishwasher Repair FAQ

Why is my dishwasher not draining?

The most common causes are a clogged filter, a restriction in the drain hose/disposer connection, or a failing drain pump. Diagnosis confirms the exact cause.

My dishwasher runs but dishes are still dirty — what’s usually wrong?

Often it’s wash circulation (motor), low water fill, blocked spray arms, or a clogged filter. I test fill and circulation so we fix the root cause.

Is a leaking dishwasher an emergency?

Leaks can damage flooring and cabinets quickly. If you can, stop using it and schedule service. If the leak is active, shut off the dishwasher’s water supply valve until we can look at it.

Do you service Bosch and KitchenAid?

Yes — Bosch, KitchenAid, Whirlpool, GE, Samsung, LG, Frigidaire, and most major brands.

Do you offer a warranty?

Yes — completed repairs include a 6-month labor warranty. Any manufacturer parts coverage is honored per their terms.

What areas do you serve?

Louisville, OH and surrounding communities within roughly a 25-mile radius.

Schedule Dishwasher Repair

Book online or text your brand + model number and what it’s doing.