Amana Washer Repair (Model NTW4516FW3) – Beloit, OH

A customer in Beloit, OH called about their Amana washer stopping mid-cycle, leaving clothes soaking wet. The NTW4516FW3 would start filling but never reach the proper water level to continue. We found a clogged cold water inlet screen blocking flow.

The Problem

The washer would begin its cycle normally but wouldn’t advance past the initial fill stage. Water would trickle in slowly, then the machine would time out and stop completely. The customer had tried restarting multiple times, but the same issue occurred on every cycle.

Diagnosis

We removed the cold water supply line and found the inlet screen completely blocked with sediment and mineral deposits. This is common in Stark County due to hard water conditions. The restricted flow prevented the washer from detecting a proper fill level, causing the control board to halt the cycle as a safety measure.

The Repair

• Parts replaced: None — screen cleaned and reinstalled
• Work performed: Removed cold water inlet screen, thoroughly rinsed debris, and reinstalled with proper torque
• Result: Test cycle completed normally with full water level and proper agitation

Is It Worth Repairing?

The NTW4516FW3 is a solid mid-range Amana model that typically runs 12-15 years with proper maintenance. This was a simple cleaning repair on a machine that’s likely only 5-8 years old, making it definitely worth fixing. These inlet screen clogs are preventable with regular maintenance.

Maintenance Tips for Amana Washers

• Check and rinse water inlet screens every 6 months — especially important in Stark County’s hard water areas
• Use only HE detergent in measured amounts to prevent soap buildup that can clog the screen faster
• Run a cleaning cycle monthly with washer cleaner or white vinegar to remove mineral deposits

Appliance Repair in Beloit, OH

Beloit is in Stark County — an area we cover regularly from our base in Louisville, OH. We also serve Alliance, Hartville, and North Canton. Louisville Appliance Repair is owned and operated by Samuel Willhite, a master-certified technician with Bosch and Speed Queen factory authorizations. If your appliance needs service, schedule online or call (330) 693-9163. You can also find us on Google and read verified reviews from customers across Stark County and surrounding areas.