Kenmore Washer Repair (Model 110.24862300) – Canton, OH
In Canton, OH, this washer stopped after filling, leaving laundry stuck. A fast fix prevented delays and water waste for the household in Stark County.
- Complaint: Washer filled but wouldn’t agitate or drain; only filled on rinse cycle.
- Cause: Broken lid switch not signaling closed.
- Fix: Replaced the lid switch and verified function.
- Result: Unit now agitates, drains, and completes cycles normally.
Diagnostic Findings
- Fills correctly but no agitation or drain
- No continuity through lid switch when closed
- Bypassed switch; unit advanced to spin and drain
- Installed new lid switch and confirmed operation
DIY? Read This First — Unplug the appliance and disconnect utilities before attempting repairs.
Disclosure: Some links below are affiliate (“sponsored”). We may earn a small commission.
Repairs Performed
Typical repair range: $125.14–$225.14.
If the repair cost approaches 50% of a new unit, it may be worth exploring replacement options.
Maintenance Tips for Appliances
- Avoid slamming the lid to protect the lid switch.
- Do not overload; keep loads balanced to reduce strain.
- In Stark County hard water, run a monthly cleaning cycle with washer cleaner.
- Inspect hoses and inlet screens every 6 months for clogs or leaks.
Final Verification
We completed functional tests to verify proper operation and checked for leaks, errors, and responsiveness.
Schedule service · Read reviews · Find parts
Disclosure: Some links are affiliate (“sponsored”). We may earn a commission.