A Hartville homeowner contacted us about their JennAir refrigerator’s ice maker not working, plus they needed their dryer door swapped to open from the opposite side. Our inspection revealed the icemaker valve was leaking and freezing the fill tube, while the icemaker mold lining was also coming off. The Problem Ice maker not working. Dryer … Read more
A JennAir refrigerator on Filomena Drive in Louisville, OH had a freezer that wasn’t staying cold while the refrigerator compartment maintained proper temperature. Our diagnosis revealed a failed start relay preventing the compressor from cycling properly. The Problem The customer reported that the freezer was not working and not staying cold. The refrigerator section seemed … Read more
A JennAir dishwasher in North Canton wasn’t draining properly, leaving standing water after each cycle. Our diagnostic revealed a completely blocked drain hose that needed thorough cleaning to restore proper drainage. The Problem The dishwasher is not draining. Water was remaining in the bottom of the tub after wash cycles completed, preventing the unit from … Read more
A JennAir W130 oven in Akron was missing a timer button, leaving the homeowner unable to set the clock or use timer functions. Our diagnosis revealed the clock set switch was broken off, but replacement parts for this older model are no longer available from the manufacturer. The Problem The customer reported their JennAir oven … Read more
We got a call from a Canton homeowner about a JennAir refrigerator with water leak at the valve where the water supply connects. When we arrived at the Shelley Street Northeast location, we found the real culprit wasn’t the water supply valve at all. The Problem The customer reported water leak at the valve where … Read more
A JennAir dishwasher in Canton was leaking from underneath, with water coming through the basement ceiling. We found the float switch was leaking where it passes through the tub and reinstalled the grommet to solve the problem. The Problem The dishwasher was leaking from underneath. Water was coming through the basement ceiling, indicating a significant … Read more
A JennAir double wall oven in Minerva, OH had its top convection section not heating. The customer had already tried replacing the heat element, but that wasn’t the problem. Our diagnosis revealed a failed control board that’s no longer available from the manufacturer. The Problem The customer reported that their JennAir double wall oven’s top … Read more
A JennAir cooktop in Akron wasn’t heating properly on the right front small burner. The homeowner called us when one of their primary cooking surfaces stopped working entirely. The Problem The customer reported that the right front small burner was not working on their JennAir cooktop. This burner showed no signs of heating when turned … Read more
A JennAir cooktop in Kensington, OH had a malfunctioning clock/display panel that needed professional assessment. Our technician found the board was unrepairable, requiring replacement options for the customer. The Problem The customer reported a malfunctioning clock/display panel on their JennAir SCG20200A cooktop. The display was not functioning properly, affecting the unit’s operation and user interface. … Read more
A JennAir stove in Beloit, OH needed attention when the upper oven broiler element failed. The customer requested inspection of the rest of the unit, which revealed a failing bake element in the lower cavity as well. The Problem Upper oven coil for broiler needs replacement. Please inspect rest of unit. Diagnosis During our inspection, … Read more