A JennAir double wall oven in Canal Fulton wasn’t heating properly in the top convection unit. The homeowner reported the top oven was slow to heat and wouldn’t get hotter than 300 degrees, and they also wanted the bottom oven calibrated. The Problem The top oven with convection was slow to heat and wouldn’t get … Read more
A customer in Uniontown called about their JennAir griddle after something came loose during cleaning. They had tried cleaning under the element and damaged an electrical connection. We found the heat element’s electrical connection was completely broken off. The Problem The customer reported that they tried cleaning under the element on their Jenn Air griddle … Read more
The upper left corner of the stove top was not working, but replacing the burner and switch fixed the issue.
A homeowner in North Canton called about their JennAir double oven with a dangerous malfunction. The broiler on the top oven was turning on by itself and wouldn’t shut off, forcing them to flip the breaker to stop it. We diagnosed a failed control board with a stuck broil relay. The Problem The customer reported … Read more
A customer in Massillon called about their JennAir cooktop when the large burner stopped working completely. Our diagnosis revealed a failed switch that required replacement under a Whirlpool service bulletin. The Problem The large burner on jenn air cooktop isn’t working. The burner would not respond to any control settings and remained completely cold even … Read more
Range was non-responsive due to a failed control board. Replaced the board and verified normal heating.
A JennAir gas range in Canton was slow to turn on and clicked constantly when the knobs were turned, especially at lower heat settings. Our technician found several loose burner caps that needed adjustment to restore normal operation. The Problem The customer reported that their gas range was slow to turn on and clicked constantly … Read more
A Canton homeowner called about their JennAir stove — the inner eye on the front right burner wasn’t working while the rest of the burner functioned normally. We found a failed element assembly, plus dangerous repair work from a previous company that created a fire hazard. The Problem The inner eye on the front right … Read more
A JennAir oven in Canton, OH was only showing clock and timer functions on the control panel. The customer reported that broil, bake, convect, and preheat functions weren’t working. Our diagnosis revealed a simple control board reset was all that was needed to restore full operation. The Problem The customer called because their JennAir oven … Read more
A North Canton homeowner contacted us about two appliances acting up on the same day. Their JennAir refrigerator’s ice maker wasn’t working, and the oven on their range had stopped heating. We found both units needed new parts to get back to full operation. The Problem The customer reported that the ice maker in fridge … Read more