A Canton homeowner called about their Kenmore dryer that wasn’t heating anymore. Everything seemed to work fine, just not heating. We found the high limit thermal fuse had failed and replaced it along with the heating element. The Problem The customer reported their dryer was not heating. Everything else seemed to work fine, but it … Read more
A Kenmore dryer on Baldwin Avenue in Alliance, OH was displaying an F01 error code and wouldn’t operate. Our diagnosis revealed a cracked solder joint in the motor relay on the back side of the control board — a common issue that we repaired on-site. The Problem The customer reported their Kenmore dryer was showing … Read more
A Kenmore gas dryer at a North Canton home wasn’t heating properly, leaving clothes damp after full cycles. Our diagnosis revealed failed gas valve coil packs — a common failure point that prevents the burner from igniting reliably. The Problem The customer reported their gas dryer was not heating properly. Clothes were coming out damp … Read more
A Kenmore dryer at a North Canton home stopped drying clothes and began sparking inside the unit. The customer had unplugged it immediately for safety. Our inspection revealed a shorted heating element that had failed catastrophically. The Problem The customer reported that the back of the dryer inside the unit began by not drying clothes, … Read more
A Canton homeowner called about their 13-year-old Kenmore dryer that wasn’t heating at all. The dryer was tumbling fine but wouldn’t shut off, and they’d been running items they had already line-dried just to test it. After opening up the unit, we found the heating element had failed completely. The Problem The customer reported their … Read more
A Canton homeowner called about their Kenmore dryer taking a long time to dry laundry, possibly a plugged vent or heat issue, plus something wrong with the spin cycle on their washer. Our inspection revealed failed coil packs in the dryer and multiple worn components in the washer’s drive system. The Problem The customer reported … Read more
A Kenmore dryer in Massillon wouldn’t start, leaving the homeowner without a way to dry their laundry. When we arrived at the Chestnut Avenue location, we found the issue wasn’t with the dryer itself but with the electrical supply feeding it. The Problem The customer reported that their Kenmore dryer won’t start. No matter what … Read more
A Kenmore dryer in Minerva, OH would not rotate or heat. Our diagnosis revealed a failed thermal fuse that had shut down the entire system to prevent overheating. The Problem The customer reported their Kenmore dryer would not rotate or heat. The unit was completely non-functional, showing no signs of drum movement or heating element … Read more
A Kenmore dryer on Bayard Road in Minerva wouldn’t turn when the customer pressed the start button. Our diagnosis revealed a faulty door switch that prevented the unit from detecting when the door was properly closed. The Problem The customer reported their Kenmore dryer won’t turn. The unit would not respond when attempting to start … Read more
A Kenmore dryer in Carrollton, OH wasn’t turning its drum at all. The customer reported the belt broke and suspected the heat wasn’t working either, though they hadn’t run it long enough to confirm. We found the belt was indeed broken and replaced it along with supporting components. The Problem The customer called because the … Read more