Maytag Washer Repair (Model PAV2300AWW) – North Canton, OH
The washer’s agitator was stagnant and the lid wouldn’t stay up. We installed a new thrust bearing and hinges to restore functionality.
maytag
Maytag Washer Repair (Model MVWB725BW0) – Minerva, OH
The washer was stuck on the spin cycle and displaying a UL code. Replacing the bearing kit and rotor resolved the issue.
Maytag Washer Repair (Model MHWE300VW00) – Alliance, OH
The washer had a filter and pump issue, but after replacing the pump, it was tested and is now functioning properly.
Maytag Washer Repair – North Canton, OH (MVWX600BW0)
A North Canton, OH household on Orchard Avenue Northeast was dealing with a Maytag washer (model MVWX600BW0) that was making noise and leaving clothes soaking wet at the end of each cycle. Samuel visited the home and found that the hub in the spin basket had stripped, requiring a replacement hub part. After the repair … Read more
Maytag Washer Repair (Model BRAVOS MVWB400VQ0) – Alliance, OH
The washer stopped before completing the wash cycle, but after replacing the bearing kit and shaft, it now runs smoothly.
Maytag Washer Repair (Model MVWB955FW1) – Louisville, OH
The washer displayed an error code F6 E2, indicating a user interface issue. Cleaning and sealing the board resolved the problem.
Maytag Washer Repair – Canton, OH
A Maytag washer in Canton, OH was filling with water but wouldn’t spin or agitate to wash the clothing. Our diagnosis revealed a broken wire on the motor that was preventing the wash action from engaging. The Problem The washer would start and fill with water normally, but it would not spin and actually wash … Read more
Maytag Washer Repair (Model MVWX655DW) – Uniontown, OH
The washer leaked water during the rinse cycle, causing flooding. The issue was likely due to a clogged drain hose.
Maytag Washer Repair (Model MVWC415EW1) – North Canton, OH
The washer had a recurring issue with water drainage, requiring a new drive hub replacement.
Maytag Washer Repair (Model MHWE450WW01) – Canton, OH
The washer displayed an F21 error code frequently, indicating a drainage issue. Replacing the drain pump resolved the problem.