A Maytag washer at a home on Martin Drive Southeast in East Sparta wasn’t securing properly during wash cycles. The lock will not lock, preventing the machine from starting its cleaning process. Our diagnosis revealed a failed lid lock assembly that needed immediate replacement. The Problem The homeowner reported that the lock will not lock … Read more
A Canton homeowner called about their Maytag washer that fills but won’t agitate. When we arrived at the 3rd Street Northeast location, we found the MAH4000AWW needed bearings and possibly motor control board replacement to restore proper operation. The Problem The customer reported that their washer fills but won’t agitate. The machine would take on … Read more
We responded to a service call in Amsterdam, OH for a Maytag refrigerator that wasn’t cooling in either compartment. What we found was a refrigerant system failure that made repair uneconomical, plus a frozen water line issue that we were able to resolve. The Problem The customer reported their Maytag refrigerator was not cooling in … Read more
A Maytag dishwasher in Sebring wasn’t starting, with four lights staying on the control panel. We diagnosed a failed main control board and replaced it with the correct part. The Problem The customer reported their dishwasher won’t start. They had four lights that stay on the control panel, indicating a control system malfunction. Diagnosis The … Read more
We serviced a Maytag washer in Canton, OH that would fill with water but wouldn’t wash or agitate. The problem turned out to be a failed lid switch that prevented the wash cycle from starting properly. The Problem The customer reported their washer fills with water but will not wash or agitate. The machine would … Read more
A Maytag washer in Canton, OH was not spinning out of balance. Our technician found multiple components had failed, requiring replacement of the shifter, belt, rollers, and coil valves to restore proper operation. The Problem The customer reported their Maytag washer was not spinning out of balance. This prevented the washer from completing its cycle … Read more
A Maytag front-load washer in Canton needed a door hinge replacement. The customer had already obtained the part and contacted us for professional installation. We completed the repair the next day with the customer-supplied hinge. The Problem The customer reported that the door hinge needed to be replaced on their Maytag front-load washer. They had … Read more
A Maytag refrigerator in Lime Springs wasn’t cooling properly, leaving the customer without proper food storage. Our diagnosis revealed a failed control board that needed replacement to restore normal operation. The Problem The customer reported their Maytag refrigerator was not cooling. This left both the fresh food and freezer compartments unable to maintain proper temperatures. … Read more
A Maytag washer in Northfield, OH was spinning but wouldn’t drain what little water was in the drum and wouldn’t start a wash cycle. Our diagnosis revealed the pressure sensor temperature control combination switch had failed, preventing the machine from adding water to the tub. The Problem The customer reported their Maytag washer would spin … Read more
We recently completed a washer repair on Arrowhead Drive Southwest in Dellroy, OH. The customer’s Maytag washer wasn’t spinning properly, leaving clothes soaked at the end of each cycle. Our diagnosis revealed a failed shift actuator that needed replacement. The Problem The customer reported that the spin cycle doesn’t work and clothes are still soaked … Read more