An Admiral oven in Sebring was getting hotter than what the temperature is set, with an electrical smell when heating. Our diagnosis revealed a burnt electronic board requiring replacement. The Problem The customer reported that the oven is getting hotter than what the temperature is set. When the oven is heating there is a electrical … Read more
A Whirlpool oven in Canton was giving erratic temperature readings, making consistent cooking nearly impossible. We started with the most common culprit — the temperature sensor — but this repair turned into a more complex diagnosis involving the control board. The Problem The customer reported erratic temperature in their Whirlpool oven. Temperature fluctuations make it … Read more
We received a service call from a Canton homeowner whose Whirlpool oven had a temperature control knob that no longer worked. The knob was not rigid and completely straight up and down, making it impossible to adjust cooking temperatures properly. The Problem The customer reported that the temperature control knob no longer works. The knob … Read more
A Canton homeowner called us about their Frigidaire electric range with multiple issues: an electric surface element with inconsistent heating, an oven light that wouldn’t turn off, and concerns about oven temperature accuracy. Our diagnosis revealed three separate component failures that required targeted repairs. The Problem The customer reported that their electric surface element had … Read more
A North Canton homeowner contacted us after their NXR gas oven stopped heating while the stovetop burners worked fine. NXR had already sent the replacement part and suggested either hiring a repair technician or watching YouTube — they wisely chose the professional route. The Problem The gas oven would not heat up, though the gas … Read more
A Whirlpool oven repair call in Akron had us diagnosing a unit where the cook top worked but the oven and broiler would not work. Our technician found a failed oven ignitor that needed replacement to restore full functionality. The Problem The customer reported that their cook top works but the oven and broiler does … Read more
A Minerva homeowner called us after discovering their gas stove was leaking and shutting off the gas supply as a safety precaution. We found the gas line connection to the oven had loosened, creating a potentially dangerous leak that required immediate attention. The Problem The customer reported that their gas stove was leaking and had … Read more
A Whirlpool oven on Knox-School Road in Alliance needed a new front door seal. The existing gasket had failed, compromising the oven’s ability to maintain proper temperature and seal during operation. The Problem The customer reported an issue with the front door seal on their Whirlpool oven. A damaged or worn door gasket affects the … Read more
A Whirlpool oven in Alliance, OH was experiencing multiple control issues after a power outage during new electric meter installation. The heating elements would shut off after just a minute or two, the fan wouldn’t turn off, and the unit couldn’t reach temperature despite the control panel functions working normally. The Problem After power outage … Read more
A homeowner in Uniontown called when their Maytag oven gave off sparks and popped the breaker, leaving the unit completely non-functional. What looked like a simple element failure turned out to be something much more serious — and unfortunately unfixable. The Problem The customer reported that their oven gave off sparks and popped breaker and … Read more