A KitchenAid wall oven in Minerva was running temperatures that varied 25 to 50 degrees from the set point. The customer could set the temp for 350 and get 325 or 375, or set it for 450 and get 400. We found the oven control needed calibration adjustment. The Problem The customer reported that oven … Read more
A KitchenAid SUPERBA 42 refrigerator in North Canton wasn’t running at all, with no lights coming on in either compartment. Our diagnosis revealed a failed master power switch that prevented the entire machine from operating. The Problem The customer reported their refrigerator not running at all, with lights in freezer or refrigerator not coming on. … Read more
A Canton homeowner called us about their KitchenAid Selectra oven displaying an F3 error code that prevented any oven operation. We also installed their new Samsung dishwasher during the same service call. The oven issue was resolved with a temperature sensor replacement. The Problem The customer reported their KitchenAid Selectra oven was showing an F3 … Read more
A KitchenAid refrigerator on Frazer Avenue NW in Canton was having intermittent ice maker issues. The customer reported their ice maker doesn’t work, but our inspection revealed it was still making ice sporadically. The Problem The customer called because their ice maker doesn’t work. They were experiencing inconsistent ice production from their KitchenAid refrigerator. Diagnosis … Read more
A KitchenAid dishwasher in Canton was having intermittent soap dispenser problems. The customer reported the dispenser doesn’t always open and it’s rather sporadic. Our diagnosis revealed a broken drawer slide was the culprit behind this frustrating issue. The Problem The customer’s dishwasher operates fine except for the soap dispenser doesn’t always open, it’s rather sporadic. … Read more
A KitchenAid oven in Alliance, OH had a completely blank touch pad that controlled the oven and clock functions. The customer couldn’t use the oven at all, though the oven light still worked when the door opened. After unplugging and resetting the stove, it operated correctly. The Problem The touch pad that controls the oven, … Read more
A North Canton customer called after having a plumber hook up water for ice on their KitchenAid refrigerator, but water was leaking and the plumber said it was the fridge leaking. They also couldn’t power on the warmer under their oven. We found both issues needed simple part replacements. The Problem The customer had a … Read more
A KitchenAid dishwasher in Canton, OH was giving its owner control panel headaches. The key pad for the cycles was not appearing to work correctly, making it difficult to cancel cycles and causing continuous beeping even when cycles were supposedly cancelled. Our diagnosis revealed a failed user interface that needed complete replacement. The Problem The … Read more
We responded to a service call in Massillon for a KitchenAid dishwasher that was leaking, leaving a puddle of water. After our inspection, we identified and resolved the issue without needing replacement parts. The Problem The customer reported their KitchenAid dishwasher was leaking, leaving a puddle of water on the kitchen floor after each wash … Read more
A KitchenAid dishwasher in Minerva was leaking out the front, requiring multiple service visits to address seal issues. The door seal had shifted position, causing intermittent water leakage during wash cycles. After replacement and follow-up repairs, the customer ultimately decided to replace the unit. The Problem The customer reported that their KitchenAid dishwasher was leaking … Read more