We completed a Samsung dryer repair on Chapple Hill Drive in North Canton, OH. The customer reported their dryer was not heating. We found a failed heat element that needed replacement. The Problem The customer called because their Samsung dryer was not heating. Clothes were tumbling normally but coming out cold and damp after full … Read more
A Samsung dryer in North Canton, OH wasn’t heating properly. The customer reported their dryer was not heating, leaving clothes damp after full cycles. Our diagnosis revealed a failed heating element that needed replacement. The Problem The customer’s Samsung dryer was not heating. Clothes were coming out damp even after running complete drying cycles, indicating … Read more
A Samsung dryer at 233 High St NW in East Canton wasn’t producing any heat, though everything else worked fine. We found a bad heating element — a common issue with Samsung dryers that required replacing the entire heating assembly. The Problem The customer reported no heat, but everything else was working fine. The dryer … Read more
A Samsung dryer in North Lawrence was displaying an HE code and overheating clothes despite the customer checking the vent for blockage and replacing the thermistor. Our diagnosis revealed the heat element had shorted to the housing, causing the high limit thermostat to trip. The Problem The customer contacted us about an HE code on … Read more
A Samsung dryer at a home on South Prospect Avenue in Hartville, OH was making terrible squeaking and screeching noises during the drying cycle. The customer reported that the motor started but the drum did not move for a minute, then began spinning like it should before the noise started. We found a worn idler … Read more