We completed a service call in Malvern, Ohio for a Whirlpool stove with a loose oven door handle. The customer reported the handle was coming loose from the door, and our inspection confirmed the mounting hardware had worked free over time. The Problem The customer contacted us because their oven door handle was loose. This … Read more
Whirlpool stove had stripped valve stems causing two burners to not shut off reliably. Replaced the front valve manifold (all four valves) to restore control.
A Canton homeowner called about their JennAir stove — the inner eye on the front right burner wasn’t working while the rest of the burner functioned normally. We found a failed element assembly, plus dangerous repair work from a previous company that created a fire hazard. The Problem The inner eye on the front right … Read more
A customer in Canton called about their Tappan stove — the right front burner doesn’t work. We found a failed surface element that needed replacement. The Problem The customer reported that their right front burner doesn’t work. The burner would not heat up when turned on. Diagnosis Testing revealed the surface element had failed and … Read more
A Frigidaire stove in OH, OH was running into a dangerous overheating problem. When you use the oven it just keeps heating and won’t stop. Our diagnosis pointed to a failed control board that lost the ability to regulate temperature. The Problem The customer reported that when you use the oven it just keeps heating … Read more
We got a call from a customer in Canton whose Thor range was having temperature accuracy issues. The oven temp was inaccurate, making consistent cooking results difficult. After testing and calibration, we had it running perfectly again. The Problem The customer reported that their oven temp was inaccurate. This is a common issue that can … Read more
A customer in Minerva called about their Admiral stove – the top oven would not get hot. Our diagnosis found the broil element was only receiving 120v instead of the required voltage, pointing to a failed relay control board. The Problem The top oven will not get hot. The customer could use other functions on … Read more
A customer in Minerva, OH needed to change from natural gas to LP gas and then install their new Admiral stove. We converted the new oven to propane and completed the installation. The Problem The customer needed to change from natural gas to LP gas and then install their new Admiral stove. Diagnosis This was … Read more
A JennAir stove in Beloit, OH needed attention when the upper oven broiler element failed. The customer requested inspection of the rest of the unit, which revealed a failing bake element in the lower cavity as well. The Problem Upper oven coil for broiler needs replacement. Please inspect rest of unit. Diagnosis During our inspection, … Read more
A Canton homeowner called when their Whirlpool electric range stopped heating completely. The oven would turn on and the display worked normally, but no heat was being generated during baking or broiling cycles. The Problem The customer reported that their oven had been working fine until it suddenly stopped heating altogether. The control panel responded … Read more