Amana Dryer Repair (Model NED4600YQ1) – Hanoverton, OH
The dryer failed to turn on after stopping mid-cycle. Replacing the door switch resolved the issue.
The dryer failed to turn on after stopping mid-cycle. Replacing the door switch resolved the issue.
The dryer stopped spinning, causing inconvenience. Replacing the door switch, thermal fuse, and thermostats restored functionality.
The freezer was not defrosting, leading to a warm refrigerator. Replacing the main control board resolved the issue.
The dryer powered on and ran but failed to heat. Replacing the coil packs on the gas valve resolved the issue.
A homeowner faced a problem with jeans stuck in the agitator, which was resolved by removing the jeans and running a calibration.
The dryer turned on and tumbled but produced no heat. Replacing the heating element resolved the issue.
A customer in Alliance called about their Amana dryer that wouldn’t turn on. They had already cleaned out the lint trap, unplugged and plugged it back in, reset the breaker, and checked the door sensor switch. This was the same unit we had taken apart earlier in the year with no obvious problem — it … Read more
A Canton homeowner called when their Amana Tandem washer wouldn’t spin. We found a plugged filter at the drain pump preventing proper drainage and spin cycle operation. The Problem The customer reported their washer won’t spin. The unit would fill and agitate normally but failed to complete the spin cycle, leaving clothes soaking wet. Diagnosis … Read more
The dryer turned on and tumbled but produced no heat. Replacing the heating element resolved the issue.
The oven wouldn’t turn on, but after resetting the tripped circuit breaker, it is now functioning properly.