Whirlpool Washer Repair (Model CABRIO WTW5500XW1) – Alliance, OH
The washer was not working, filled with water, and errored out. Replaced the shift actuator to restore functionality.
The washer was not working, filled with water, and errored out. Replaced the shift actuator to restore functionality.
The dryer was not heating properly, but after replacing the heating element and thermostats, it is now functioning well.
The dryer was making a loud squeaking noise while the drum turned. Replacing the idler pulley and drum support wheels resolved the issue.
A Whirlpool Cabrio washer in North Canton wouldn’t operate, with the customer reporting it seemed like the same problem from a previous repair. We discovered the water valve had failed again and handled this as a warranty replacement. The Problem The customer called reporting their machine won’t operate. They mentioned we were there a month … Read more
A Whirlpool Cabrio washer in Canton wasn’t spinning and made a really messed up noise when it tried. The machine would still wash and go through the wash cycle, but the spin function had failed completely. We found the tub hub had worn out and needed replacement. The Problem The customer reported that their Whirlpool … Read more
A Louisville homeowner called about their Whirlpool Cabrio washer that was louder during spin cycle and leaking from the bottom. After diagnosing the unit, we found the washing machine had failed bearings and was beyond economical repair. The Problem The washer is louder during spin cycle and is leaking from the bottom. The customer mentioned … Read more
A customer in Paris, Ohio called us after flooding on their main floor affected their Whirlpool Cabrio washer. They reported the unit wouldn’t power up and was going haywire after water exposure. When we arrived and hooked up the washer, we found everything was actually operating correctly. The Problem The customer’s sink flooded on the … Read more
A Whirlpool Cabrio washer in Akron needed new tub bearings, but when we arrived at the Megglen Avenue location, we discovered the damage was beyond economical repair. The upper bearing was stuck in the tub in such a way that removal would have destroyed the tub itself. The Problem The customer contacted us because their … Read more
A Whirlpool Cabrio washer in Akron stopped mid-cycle and displayed error code F7 E6. The machine would turn off and on but wouldn’t finish the cycle or start a new one. We found a stuck actuator that needed replacement. The Problem The customer reported that the washer stopped mid cycle and displayed error code F7 … Read more