A Maytag washer in Canton, OH wouldn’t start and had a blinking lid lock light. After diagnosing the unit, we found multiple major components had failed, making repair uneconomical. The Problem The customer reported that the cycle does not start and the lid lock light blinks. This typically indicates either a lid lock issue or … Read more
A customer in Canton, OH called about their Maytag dryer after moving into a new address and having a gas line installed. The dryer was not heating and they noticed a gas smell coming from the unit. After testing the new gas line and checking the dryer’s operation, we determined the unit was actually working … Read more
A Canton homeowner called when their Maytag dishwasher went completely dark. The display won’t light up and the dishwasher does not turn on, even after attempting to flip the breaker with no change. The Problem The customer reported that the display won’t light up and the dishwasher does not turn on. They had already attempted … Read more
A Maytag dryer in Canton wouldn’t stay lit, leaving the homeowner without a way to dry clothes. Our technician diagnosed faulty coil packs on the gas valve and restored proper operation with a straightforward parts replacement. The Problem The customer reported their Maytag dryer will not stay lit. The unit would attempt to ignite but … Read more
A Maytag dryer in North Canton was making clunking noises when loaded with wet clothes. Our inspection found the unit operating properly, but we discovered a restricted vent that needed attention. The Problem The customer reported that their Maytag dryer clunks when wet clothes are in it. According to the tenant, the noise occurs for … Read more
A Maytag washer in Massillon wasn’t spinning clothes dry, leaving items very wet after cycle. The customer had already checked to make sure it was level, but the problem persisted. Our diagnosis revealed error codes F0E5 (off balance load detected) and F7E6 (motor fault), pointing to a mechanical failure in the spin system. The Problem … Read more
A Maytag Bravos washer in Beloit was making a grinding noise when agitating and barely agitating, plus making a whining noise when it started to spin out. Our diagnosis revealed a failed drive hub in the tub — a common failure point on these top-load models that connects the agitator to the drive system. The … Read more
We responded to a multi-appliance service call in Akron, OH where a customer was dealing with three separate issues across their laundry room. The Maytag washer started with grinding sound while washing and now has an extremely delayed start and does not spin, the second washer won’t empty and stopped agitating, and the dryer wouldn’t … Read more
We recently serviced a Maytag washer in Homeworth that wouldn’t spin. Our technician found the drive hub had failed, which is what connects the motor’s power to the wash basket. After replacing this critical component, the washer returned to full operation. The Problem The customer reported their Maytag washer won’t spin. This means clothes were … Read more
We handled a dual repair call in Canton, OH, where a customer reported their Maytag dryer doesn’t heat and several LED lights on their fridge weren’t working. Our diagnosis revealed a failed heating element in the dryer and burned-out LED light assemblies in the refrigerator. The Problem The customer contacted us because their dryer doesn’t … Read more