Samuel Willhite 
A Canton homeowner called when their Kenmore oven started smoking and multiple functions failed after hearing a buzz from the back of the stove. The fuse block was melted and burnt, leaving only the stovetop and clock working while the oven lights stayed on constantly. The Problem While operating the oven, the customer heard a … Read more
A customer in North Canton called about their GE dryer that was not working. Our diagnostic revealed multiple failed components requiring a comprehensive rebuild to restore proper operation. The Problem The customer reported their dryer was not working. The unit showed no signs of operation when we arrived for inspection. Diagnosis Our examination revealed extensive … Read more
A Canton homeowner contacted us about ice building up at the bottom of their Admiral refrigerator freezer, eventually dripping onto the floor. The customer suspected a clogged drain plug was causing the problem. Our diagnosis confirmed the drain system needed attention. The Problem The customer reported ice forming at the bottom of the freezer that … Read more
A Kenmore dryer in OH wasn’t working at all, so we rolled out to investigate. What looked like an appliance problem turned out to be a dangerous electrical issue that had already tripped the circuit breaker. The Problem The customer reported their dryer wouldn’t work at all. No lights, no heat, no tumbling — completely … Read more
A Samsung dryer in Massillon wasn’t spinning despite running normally. When we arrived, the motor was operating correctly, suggesting an intermittent problem that may require monitoring. The Problem The customer reported their Samsung dryer runs but does not spin. This type of intermittent issue can be frustrating since the symptom isn’t always present when the … Read more
A Canton homeowner contacted us after moving their Whirlpool Cabrio washer to a new location. They had over-tightened the inlet valve for the hot water line during installation, stripping the connection and causing a leak. They already had the replacement part from Whirlpool and needed professional installation. The Problem The customer moved locations and when … Read more
A customer in Alliance called about their Amana dryer that wouldn’t turn on. They had already cleaned out the lint trap, unplugged and plugged it back in, reset the breaker, and checked the door sensor switch. This was the same unit we had taken apart earlier in the year with no obvious problem — it … Read more
A Kenmore washer at a home on Kenyon Avenue NW in Massillon quit spinning and didn’t drain during the cycle. The customer could hear it trying to work but nothing happened when it should have spun and drained. We found a failed drain pump that needed replacement. The Problem The washer quit spinning and didn’t … Read more
We recently completed a dual appliance repair in East Canton for a customer dealing with two separate issues on the same service call. Their Whirlpool refrigerator was leaking water even though the water dispenser was turned off, and their oven couldn’t heat past 300 degrees and took over an hour to reach that temperature. The … Read more
A coin operated washer at a rental property on Fairlawn Avenue in Louisville had developed a loud knocking sound during the spin cycle, and the agitator arm had stopped spinning entirely. The customer had already replaced the agitator dogs but the problem persisted, indicating a deeper mechanical failure in the drive system. The Problem The … Read more