A Kenmore dryer in Massillon wouldn’t start, leaving the homeowner without a way to dry their laundry. When we arrived at the Chestnut Avenue location, we found the issue wasn’t with the dryer itself but with the electrical supply feeding it. The Problem The customer reported that their Kenmore dryer won’t start. No matter what … Read more
A Kenmore dryer in Minerva, OH would not rotate or heat. Our diagnosis revealed a failed thermal fuse that had shut down the entire system to prevent overheating. The Problem The customer reported their Kenmore dryer would not rotate or heat. The unit was completely non-functional, showing no signs of drum movement or heating element … Read more
A Kenmore dryer on Bayard Road in Minerva wouldn’t turn when the customer pressed the start button. Our diagnosis revealed a faulty door switch that prevented the unit from detecting when the door was properly closed. The Problem The customer reported their Kenmore dryer won’t turn. The unit would not respond when attempting to start … Read more
A 4-year-old Whirlpool dryer in Louisville wouldn’t turn on — the second time this had happened to the homeowner. They suspected it was a fuse issue again, and they were right. The Problem The dryer would not turn on. This had happened once before, and the customer believed it was a fuse issue. The unit … Read more
A Salineville customer called about their Maytag dryer not heating up anymore. The customer had already disassembled the dryer when we arrived, so we started our diagnosis with the unit partially apart. The Problem The customer reported their dryer was not heating up anymore. The problem had been sporadic previously, making it difficult to predict … Read more
A Kenmore dryer in Carrollton, OH wasn’t turning its drum at all. The customer reported the belt broke and suspected the heat wasn’t working either, though they hadn’t run it long enough to confirm. We found the belt was indeed broken and replaced it along with supporting components. The Problem The customer called because the … Read more
A Canton homeowner called about their Whirlpool dryer that sounded like the belt was broke. When we arrived at the Marvella address, the dryer was operating correctly at time of service. The Problem The customer reported that it sounded like the belt was broke on their Whirlpool dryer. Diagnosis The dryer was operating correctly at … Read more
A Samsung dryer in Salem, OH wasn’t getting hot, leaving clothes damp after full cycles. We found the heating element had failed completely and replaced it with a new assembly to restore proper heat output. The Problem The customer reported their dryer is not getting hot, clothes damp. The unit would run through cycles normally … Read more
A Samsung dryer in Mineral City wasn’t heating while clothes tumbled, leaving loads damp after full cycles. Our diagnosis revealed a blown thermal cutoff that had shut down the heating system to protect against overheating. The Problem The customer reported that their dryer doesn’t heat while clothes tumble, suspecting the heating unit. The drum was … Read more
A Canton homeowner called about their Admiral dryer tripping the breaker and sparking. When we arrived at the Orchard Dale Drive location, we discovered the dryer itself was fine — the real problem was hiding behind the wall outlet. The Problem The customer reported that their dryer was tripping the breaker and sparking. This is … Read more