A customer in Akron called about their Amana dryer that started squeaking and now sounds like a washer that’s off balance. Our diagnosis revealed a worn roller and some unexpected debris in the drum that needed attention. The Problem The dryer runs but was squeaking initially, and the noise evolved into something that sounds like … Read more
We responded to a service call in North Benton, Ohio for an Amana refrigerator with an ice maker not making ice. Upon inspection, we found the ice maker assembly had broken and was no longer cycling around. The Problem The customer reported their Amana refrigerator’s ice maker not making ice. The unit had completely stopped … Read more
We received a service call from Canton for an Amana dryer that required two dry cycles to finish loads and was making tumbling sounds during operation. Our diagnosis revealed failed drum support components and a heavily obstructed dryer vent causing the extended drying times. The Problem The customer reported that when drying clothes, they had … Read more
A Canton homeowner called us about their Amana refrigerator not running despite having power, suspecting a faulty compressor. What we found was much simpler than expected — the customer had accidentally switched the temperature control off in the freezer compartment. The Problem The customer reported their fridge not running, has power, suspect faulty compressor. This … Read more
The ice maker was not producing ice due to a faulty door gasket and a dirty water filter. Replacing these components restored functionality.
The refrigerator was not cooling properly due to ice buildup around the evaporator fan. Cleaning the ice resolved the issue.
The refrigerator was not cooling properly, causing fresh food to warm and frost to build up in the freezer. The evaporator fan motor was replaced to resolve the issue.
The washer was leaking from the cold water hose near the faucet. Replacing the fill hoses resolved the issue.
The washer was leaking, likely due to a faulty water pump. The issue was resolved by replacing the pump.
The dryer failed to turn on after stopping mid-cycle. Replacing the door switch resolved the issue.