Frigidaire Range/Oven Repair (Model FFGF3023LWD) – Louisville, OH
Oven stalled around 350°F regardless of the set temperature. Replacing a weak bake igniter restored proper preheat and stable oven temps.
Oven stalled around 350°F regardless of the set temperature. Replacing a weak bake igniter restored proper preheat and stable oven temps.
Freezer was warm at ~20°F due to a failed evaporator defrost thermistor causing frost buildup. Replaced the thermistor; normal temps expected within 24 hours.
Oven wouldn’t light while surface burners worked. Weak bake igniter drawing low amperage; replacing the igniter restored normal preheat (~8.5 minutes).
Dryer heated but the drum would not turn. A broken drive belt was replaced, and the unit now tumbles and dries properly.
Dryer squeaked during operation. Worn front bearing slides and drum bearing; replaced slides, bearing, and belt to restore quiet, smooth tumbling.
Frigidaire dryer in Louisville wouldn’t start because the door wouldn’t latch. Replaced the broken latch to restore safe closure and normal operation.
Dryer failed to start due to a broken belt. Replaced the belt, pulley, and roller kit to restore normal operation.
Front-left and right-rear burners were stuck on high due to welded infinite switches. Replaced both switches to restore proper temperature control.
The heating element failed. Replaced the heater assembly (with high-limit and cycling thermostats) and serviced the rollers, restoring proper heat and cycling.
Dryer ran continuously after cycles due to a stuck relay on the control board. Replaced the control board and door switch to restore proper shutoff.