A Canton homeowner called Louisville Appliance Repair because their Whirlpool dryer hose needed connected. When we arrived at the Old Hickory Avenue location, we found the dryer needed a proper connection from the unit to the wall vent. The Problem The hose needs connected. The existing connection between the dryer and wall vent was not … Read more
A Louisville homeowner called when their gas dryer stopped heating completely. We found the thermal fuse had failed — a common issue that can happen from restricted venting or simple wear and tear over time. The Problem The customer reported their gas dryer was not heating. The unit would run through its cycles normally, but … Read more
A Louisville laundromat called with intermittent heating issues on three commercial Dexter dryers. The owner had identified faulty Synetek ignitors as the root cause and requested replacement with Gemline control modules. The Problem North Chapel Laundromat reported intermittent no heat on their newer Dexter dryers. The owner had already diagnosed faulty Synetek dryer ignitors as … Read more
We responded to a service call for an LG dryer on Helen Place NW in Canton, OH. The customer reported “.01” and our diagnosis confirmed “.01” The Problem The customer complaint was documented as “.01” Diagnosis Our inspection revealed the issue described as “.01” The Repair Parts replaced: No parts replaced Work performed: .01 Result: … Read more
We completed an adjustment service call on an Electrolux dryer in Canton, OH. The customer requested an adjustment, and our technician performed the necessary adjustment to restore proper operation. The Problem The customer called requesting an adjustment for their Electrolux dryer. No specific operational issues were detailed beyond the need for adjustment. Diagnosis Our technician … Read more
A customer in Canton called about their LG dryer that wasn’t working properly. After diagnosing the issue, we determined no parts replacement was needed and performed the necessary repair to restore normal operation. The Problem The customer reported their LG DLEX760WE dryer was experiencing operational issues that prevented normal use. Diagnosis Our technician Samuel Willhite … Read more
A Maytag dryer in Alliance, OH wasn’t heating and drying properly, though it spun fine. We found the heating element had failed completely and replaced it with a new one. The Problem The customer reported their Maytag dryer won’t heat and dry. The drum spins fine, but clothes come out damp after a full cycle. … Read more
A customer on Gephart Avenue in Louisville called about their Whirlpool dryer with a door latch broken. Our technician found the catch had failed, preventing the door from securing properly and the dryer from starting. The Problem The customer reported the door latch broken on their Whirlpool dryer model WED4815EW1. This prevented the door from … Read more
The dryer was running but not heating, taking about 90 minutes to dry a medium load. Replacing the igniter and gas valve coil packs restored proper heat.
A Samsung dryer in North Canton wasn’t heating up, leaving clothes damp after full cycles. The customer had already checked the breaker with no luck. We found a failed heating element and worn idler pulley causing the no-heat condition. The Problem The dryer would turn but not produce any heat. The customer had tried resetting … Read more