Samuel Willhite A Kenmore washer in North Canton wasn’t draining or spinning, leaving water sitting in the tub after wash cycles. The machine would fill and wash normally, but stopped functioning during the drain and spin phases. We diagnosed a failed lid switch that was preventing the washer from advancing through its full cycle. The Problem The … Read more
A Maytag refrigerator on Sycamore Drive Northwest in North Canton had stopped cooling completely. Our diagnostic revealed the compressor was bad, which explains the total loss of refrigeration. The Problem The customer reported their Maytag refrigerator had stopped cooling. Both the refrigerator and freezer compartments were no longer maintaining proper temperatures. Diagnosis Testing the refrigeration … Read more
A North Canton homeowner called about a Whirlpool dishwasher that wasn’t installed properly and was tipping forward out of its place. The unit needed to be fastened and screwed in properly to prevent the dangerous forward tipping. The Problem The dishwasher wasn’t installed properly and was tipping forward out of its place. This created a … Read more
A Samsung dryer in Uniontown was making a very loud sound and overheating after the homeowner cleaned the lint trap. Our diagnosis revealed failed heating element and idler pulley components that needed replacement. The Problem The customer reported their Samsung dryer was making a very loud sound and seems to be over heating after they … Read more
A Whirlpool Cabrio washer in Louisville, OH was stuck mid-cycle with water that wouldn’t drain. The homeowner called us when their machine displayed error codes and refused to complete any wash cycle. The Problem The customer reported that their washer does not complete wash cycle and water will not drain. The machine was displaying multiple … Read more
We serviced an Admiral dishwasher in Louisville that wouldn’t drain all the way, ran cycles for 2 hours, and had door dripping issues. All three problems started simultaneously, pointing to seal and drainage component failures. The Problem The customer reported their dishwasher won’t drain all the way, cycle runs for 2 hrs, and door drips. … Read more
A Whirlpool washer in Hanoverton was leaking water, prompting a service call to diagnose the issue. Upon inspection, we found water splashing from between the detergent cup in the wash machine tub, with failing bearings adding to the unit’s problems. The Problem The customer reported water leaking from their Whirlpool washer. Water was visibly escaping … Read more
A Whirlpool washer service call in Hanoverton brought us to a unit with a broken agitator. Our diagnosis revealed the transmission had failed, leading the customer to decide on replacement rather than repair. The Problem The customer reported that the agitator is broke. This prevented the washer from properly cleaning clothes during the wash cycle. … Read more
A KitchenAid oven in Malvern, OH was sparkling and producing flames from the baking element. We found a failed baking element that needed replacement, plus a clock that had lost its settings. The Problem The customer reported that the element was sparkling then had a flame. The clock/timer also wasn’t working. This was happening at … Read more
A Whirlpool washer in Minerva had an agitator that wouldn’t spin. When we opened it up, we found the agitator was stripped and needed replacement. The Problem The customer reported that the agitator won’t spin. This left clothes poorly cleaned since the agitator provides the washing action that moves water and detergent through the load. … Read more